Pacohelix Posted April 14, 2016 Share Posted April 14, 2016 hey not sure if my first post went through. I'm not a tech guy. I am running my helix into a carvin rx800 powered mixer then in to 2 phonic stage moniters. my sound is nasally. I'm sure this helix sounds awesome through the right stuff. but what is the right stuff. please help Quote Link to comment Share on other sites More sharing options...
Tyton Posted April 14, 2016 Share Posted April 14, 2016 JTV69 - VDI cable into Helix, out of Helix by the L6 link output into (2) Line6 L2m cabinets. This brings stereo into the sound spectrum The best tone or tones I have had since using Line6 gear. Over 15 years Quote Link to comment Share on other sites More sharing options...
Pacohelix Posted June 1, 2016 Author Share Posted June 1, 2016 I picked up a dt25 and im running the helix into it via L6 link. sounds great Quote Link to comment Share on other sites More sharing options...
DunedinDragon Posted June 1, 2016 Share Posted June 1, 2016 It tends to go two basic ways. Either direct into a powered monitor or powered cabinet, or powered studio monitors; or otherwise into the power amp portion of a standard guitar amp using the return loop effects on the amp typically. There are other more exotic arrangements, but that's mostly what people tend to use. Quote Link to comment Share on other sites More sharing options...
HonestOpinion Posted June 1, 2016 Share Posted June 1, 2016 Your current setup is probably fine although there are a ton of great options out there as far as equipment. I would just work on EQ and high cuts to get rid of the nasal sound in your current system. Quote Link to comment Share on other sites More sharing options...
Pacohelix Posted June 5, 2016 Author Share Posted June 5, 2016 I picked up a dt25 and am now running L6 link sounds pretty dang good Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.