hughsweet Posted April 16, 2016 Share Posted April 16, 2016 Just got a jtv 69,have connected to monkey and workbench but i can not get any sound tried audio interface and tried a Korg muit xf unit anybody have the same problem ? Quote Link to comment Share on other sites More sharing options...
shawnmx Posted April 17, 2016 Share Posted April 17, 2016 Is the JTV's battery properly charged? Plugging it into the Variax USB interface does not provide power to the guitar's electronics. Quote Link to comment Share on other sites More sharing options...
hughsweet Posted April 17, 2016 Author Share Posted April 17, 2016 Yes fully charged battery Quote Link to comment Share on other sites More sharing options...
silverhead Posted April 17, 2016 Share Posted April 17, 2016 When using Workbench the sounds are produced by the Variax - not by the computer. Make sure you have your Variax 1/4" output connected to some monitoring device (amp, mixer, ...). The 1/4" jack on the Variax needs to have a cord connected anyway, even a dummy plug, to trigger the battery. But you don't want a dummy plug - you want it connected to something. Quote Link to comment Share on other sites More sharing options...
clay-man Posted April 18, 2016 Share Posted April 18, 2016 Yes, remember, the Workbench interface does not double as an Audio Interface. You will not hear anything through your computer via the workbench interface. This is merely for the computer and the Variax to communicate with eachother so you can alter the settings of your Variax. Quote Link to comment Share on other sites More sharing options...
hughsweet Posted April 18, 2016 Author Share Posted April 18, 2016 Sorted had to get a new guitar cable Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.