pilottes Posted June 7, 2016 Share Posted June 7, 2016 I noticed that some noise from my tube amp was making it back to Helix (4CM hookup) even if the FX Loop block was disabled. To fix this I had to assign the return level parameter to flip between 0db and -60db, So beware if you have noisy devices in loops.... Quote Link to comment Share on other sites More sharing options...
smythejmd Posted June 8, 2016 Share Posted June 8, 2016 That's probably to support reverb tails for pedals in the effects loop. I think you can disable that. Quote Link to comment Share on other sites More sharing options...
phil_m Posted June 8, 2016 Share Posted June 8, 2016 That's probably to support reverb tails for pedals in the effects loop. I think you can disable that. Yes, this is correct. If you turn the "Trails" parameter in the effects loop block off, this will mute the return as soon you bypass the block. Quote Link to comment Share on other sites More sharing options...
lokimoto Posted June 8, 2016 Share Posted June 8, 2016 Yes, this is correct. If you turn the "Trails" parameter in the effects loop block off, this will mute the return as soon you bypass the block. I had the same issue with my Kay Fuzz, and disabling trails, just solved the problem! Quote Link to comment Share on other sites More sharing options...
pilottes Posted June 9, 2016 Author Share Posted June 9, 2016 The trails! Absolutely right! It explains everything. Thanks! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.