ericvlvn Posted March 4, 2017 Share Posted March 4, 2017 When I switch on the wah in a certain patch on the firehawk fx I notice that the loudness increases in comparison to the original volume. It is not possible to change the volume of the wah effect. Does anyone know how to get the same loudness with the wah pedal switched on and off? Quote Link to comment Share on other sites More sharing options...
silverhead Posted March 4, 2017 Share Posted March 4, 2017 Does the Wah have a Mix parameter? Lower the Mix level, allowing more of the unprocessed signal through and less of the Wah-processed signal. Quote Link to comment Share on other sites More sharing options...
mcbeddall Posted March 5, 2017 Share Posted March 5, 2017 It's worth checking what you have the volume pedal set to on the patch, it's possible that you are increasing the volume via the footpedal before the wah is engaged. I have no increase in volume when I use my wah, but I know all my footpedal settings are at maximum volume for each patch. The wah does cut through the mix more due to the higher frequencies but it definitely doesn't get noticeably louder Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.