Jam with youtube videos from computer

[em07189]

Is it possible to jam with youtubes vídeos in my Windows PC?

 

I mean  can i hear the sound from the youtube vídeos and play guitar along with the unit at the same time, and hear everything at the same time from headphones? how do i Setup the unit for this?

 

Is it possible to control the unit from my Windows PC?

[Triryche]

If you have not already, install the USB drivers, it allows you to use the FX100 as a USB Audio interface.

Then all you need to do is connect your headphones to the FX100.

 

No, currently there is no PC editor for the AMPLIFi series.

[mkopec]

Where are the drivers?  I can't locate on the line 6 downloads page

[Triryche]

There are 3 dropdown menus, select, your product, driver, OS and click GO.

[Uberjohn]

Thanks! I installed the drivers on my Windows 10 system, making the FX100 a sound output device (via USB) and now I can play along with youtube and my own mp3s without any lag. I have connected the 2 "main out" lines to an old Yamaha AV receiver and drive either large speakers or headphones from there.

 

Cables required:

* USB 2.0 Cable - A-Male to B-Male (I have also used a USB 2.0 extenstion cable to lengthen the reach, but it is better to have a single cable.)

* shielded audio cable, male 1/4 inch mono to male RCA plug (left channel from "main out" on FX100.)

* shielded audio cable, male 1/4 inch mono to male RCA plug (right channel from "main out" on FX100.)

 

Instead of the separate output cables, you could use the stereo headphone jack with a TRS plug on one end of the cable to a pair of RCA plugs on the other end.