mamiely9 Posted November 26, 2017 Share Posted November 26, 2017 Is there any way to add effects blocks to the signal chain for a profile on Firehawk FX? For example, I have an external compressor so I don't plan on assigning the Firehawk compressor to a foot switch. I was hoping I could add another effect in place of it (and in addition to the 3 completely assignable blocks). Right now I just have an unused footswitch because of this and would like to add an effect block and assign it to that switch if possible. As far as I know this cannot be done, but possibly functionality that could be added? Quote Link to comment Share on other sites More sharing options...
suedehead99 Posted November 28, 2017 Share Posted November 28, 2017 You're right that you can't swap the compressor but you can assign the foot switch to another effect. If you need an extra wildcard effects slot, download the preset BJClean1 1 Quote Link to comment Share on other sites More sharing options...
mamiely9 Posted November 29, 2017 Author Share Posted November 29, 2017 Thanks. It looks like BJClean1 cuts out the effects loop, which I had been using. Is there an option for an extra wildcard that still has the effects loop? Quote Link to comment Share on other sites More sharing options...
suedehead99 Posted November 29, 2017 Share Posted November 29, 2017 I'm afraid not. It's 3 wild cards or, as with BJClean1, 4 slots but no FX loop. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.