Jump to content

Search the Community

Showing results for tags 'edit'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Content Type


Forums

  • Community Support
    • Multi-Effects Units
    • Variax Instruments
    • Amplifiers
    • Computer Based Recording
    • Live Sound
    • Pedals/Controllers
    • Dream Rig - Line 6 Product Integration
  • General Discussion
    • Share your Settings
    • Line 6 Lounge

Categories

  • General FAQ
    • Operating System-specific Information
  • Tutorial Videos
  • Effects/Controllers
    • HELIX/HX
    • DL4 Stompbox Modeler
    • FBV Controllers (MKII / 3)
    • M5
    • Firehawk FX
  • Recording
    • Helix Native
    • Metallurgy
    • Echo Farm/Amp Farm
    • POD Farm / POD Studio / TonePort
    • Computer Audio Set Up and Troubleshooting
  • Amplifiers
    • Catalyst
    • Spider V
    • Powercab
    • Spider IV/Spider Online
    • Spider Jam
  • POD
    • POD Go
    • POD HD X
    • Pocket POD
  • Guitars
    • JTV / Shuriken / Variax Standard / Workbench HD
  • Relay/XD-V Digital Wireless
  • Legacy Products
    • POD
    • Amps
    • Mobile Products
    • Effects and Controllers
    • AMPLIFi Series
    • Live Sound
    • Digital Wireless
    • 1st Gen Variax Guitars / Bass / Workbench
    • Software
    • Dream Rig
    • POD Studio / Tone Port / GuitarPort

Find results in...

Find results that contain...


Date Created

  • Start

    End


Last Updated

  • Start

    End


Filter by number of...

Joined

  • Start

    End


Group


AIM


MSN


Website URL


ICQ


Yahoo


Jabber


Skype


Location


Interests


Registered Products

  1. I use Pod Go Edit v1.3 to save (Export) files to disk. Since the most recent HW and SW upgrade I've experiences the following problems. When I export my preset to disk and later load it, changes are not being saved. However, if I save the preset to Pod Go internal memory and then Export it, I can recall it later with no problems. I've been doing this for years way back to the days of GearBox. Anyone else having similar problems. Second difficulty is in previous versions of Pod Go Edit, if a change was made to a preset, the Preset Name would be ITALICIZED to denote that a change has been made and suggest that you might want to Save the change - in case you forgot. I made a quick video to illustrate that both problems exist [ https://youtu.be/6HqgO1J1twU ]. Anyone else having similar problems?
  2. Greetings friends. I have had this little unit for about a week now and am almost done learning all of the tricks and possibilities it has and can do and am loving it. I'm surprised how well done the interface and usability is with this thing. They weren't kidding when advertising it as 'Ridiculously easy to use'. However I noticed some room for improvement regarding the footswitches in stomp mode. To cut right to the chase - I'd love to be able to edit and change the color of the 'footswitch LED'/'stompbox in the LCD' as well as have the option to rename the block to whatever I desire Why you might ask? Well if you assign and merge a few blocks into one switch it just reads 'MULTIPLE (2)' or whatever number of stompboxes or parameters you assign to that footswitch. The color also becomes white. While it's all fine and dandy with one, what if I'd want to do that with all six footswitches? Then I'd have six almost identical looking switches. And what if I do that with all of the available presets? It would be quite difficult to remember what is where after a while. A combination of a color and some text would make life a lot easier. This is not a rant or anything, the unit is quite versatile as it is and this isn't a huge issue, It's just my two cents which might be interesting to a lot of other people as well. So regardless of the possibility of Line6 implementing something like that with a firmware update in some distant future, the point of this topic is this: How do I even get this idea to their developer team for at least a consideration?
  3. How do I access the Catalyst Edit Software? Go to Line6.com, and click on the "Downloads" tab. Select your Catalyst amp model from the Hardware dropdown, then select "Catalyst Edit” from the Software dropdown, and select your operating system/hardware (i.e. Windows 10, Mac OS, iOS, Android). What devices can I use the Catalyst Edit on? Catalyst Edit was designed onto work on Quad Platform Architecture (QPA), meaning it can be used on Windows Computers, Mac computers, i-Phone/i-Pad devices, and Android phones and tablets. System requirements - MacOS 10.14 or newer, Windows 7 or 10, iOS (i-phone/i-pad) 12.1 or newer, or Android™ OS 6.0 or newer. For optimal USB audio performance on Windows computers, download and install the free Line 6 CATALYST ASIO driver for from line6.com/software. How can I determine which version of the Catalyst Firmware I have on my amp? Make sure you have downloaded the most recent version of "LIne6 Updater". Connect your Catalyst amp to a computer/device via USB, and open the Updater. Your amplifier should be displayed, and the Firmware version indicated as below – What does Catalyst Edit Allow me to do? Catlyst Edit is designed to allow additional adjustments to · your amp settings (Gain, EQ, etc), · deep amp parameters like HUM, BIAS, and SAG. · Activate the Noise gate. · You can apply a cab simulator, along with specific microphone and placement, to the Direct Outputs (XLR and USB), · Select and adjust the EFFECT settings · Select and adjust REVERB settings. These settings can then be saved directly to your amplifier in one of twelve "preset" locations (6 Banks of Channels A & B) , or to a separate file location on your device.
  4. from the download menu - if you select HX Edit to download and windows 10 you get the MAC version. .DMG file. Not windows. I downloaded the windows 7 version to get an EXE file. Please fix Line 6.
  5. Q: I am receiving a java error when I try to run Line 6 Edit 3.0 or Workbench 1.5 on Windows XP, Vista, and Windows 7/8? A: Line 6 Edit and Workbench require Java Runtime Environment (JRE) 5 to operate correctly, and will experience a "Java Error" if JRE 5 is not detected on the computer. You can manually download and install JRE 5 from the following location on the Oracle website: JRE 5.0 Update 22 Download Page . Please note: This workaround pertains to 32 bit Windows OS installations only and will not work with 64 bit Windows OS installations. The Mac legacy installers are found at https://support.apple.com/kb/DL1572?locale=en_US
  6. Hey everyone! Long time HD Pro user and fan here. So this unit has now been retired to a specific project I'm part of and I was wondering if it's possible to rename banks using the edit software? (Not just the individual patches/presets or the setlist, but the numbered bank that is made up of 4 patches). By default these are assigned number but the act I'm part of now is very FX heavy so it would be great to customize and dedicate a bank of 4 presets to a specific song and have that also show up on my mk2 floorboard for live shows. Anyone who can answer this will be rewarded with a crisp digital high 5 from yours truly! Thanks in advance!
  7. Hello all, Does anyone know if there is a MIDI CC code to mimic a push on view button of the HX stomp ? Thanks
  8. Q: What is Spider Valve Edit? A: Spider Valve Edit is offered as a free software editor for all Spider Valve Mk II (112, 212, HD) amplifiers owners. Spider Valve Edit requires either a MIDI to USB connection from the amp to a computer, or a and CAT-5 connection from the amp to a Line 6 FBV Shortboard MkII or FBV Express MkII Series Controller with USB connection to a computer. See the following link for more information on updating your Spider Valve Mk II: Updating the Spider IV (75, 120, 150, 150HD) using the FBV Mk II and Line 6 Monkey Q: Do I need to have version 1.50 (or later) firmware installed on my Spider Valve Mk II amplifier to use Spider Edit? A: Yes, firmware version 1.50 or later is necessary to interface with Spider Valve Edit. Q: Where can I download Spider Valve Edit? Spider Valve Edit Download Q: How Can I get the Spider Valve Edit Manual? A: You can open the PDF document attached at the bottom of this document, or select the F1 key when using the Spider Valve Edit program. Q: Can I share Spider Valve Mk II tones using Customtone? A: Yes, here is the direct link to the Spider Valve customtone sharing site: Customtone Q: What is the file extension for files that will load into Spider Valve Edit? A: Spider Valve Edit will accept the .sve (single patch) and .svb (bundles) file extensions. Q: Are Spider Valve Mk II tones compatible with the Spider IV tones found on Customtone? A: Although the amp models are the same, the extension name for Spider Valve Mk II and Spider IV are different. Q: Why am I seeing an asterisk in the patch title when I change a parameter in a preset? A: An asterisk will show preset that has been edited, and will need to be saved either on the computer or the amp to make the change permanent. Q: Can I use the FBV Mk II to control the Spider Valve Mk II when I am using the FBV controller to interface with Spider Valve Edit? A: The FBV controller cannot function as an amp controller when being used as an interface for Spider Valve Edit. Q: Can I import multiple tone patches at once? A: You can import single tone patches or bundles at once, but not multiple single patches simultaneously. Q: Can I change the global (Auto FX, MIDI, Loop routing, etc.) parameters in Spider Valve Edit? A: Global parameters can be changed on the amp, but cannot be controlled by the editor.
  9. Hi guys... Firstly, the problem I am having has only happened since I updated to Helix 3.0. So - when I load a new preset and go to snapshot mode, as soon as I press a footswitch for an alternative snapshot, I get the small 'E' icon which suggests I have edited something. any further switching of snapshots doesn't help and the snapshots do not default back to the original settings. Yet, when I go out of the preset and come back into it and go back into snapshot mode again, the 'E' has gone but returns as soon as I hit a footswitch. I have seen other users are experiencing the same issue. Please help with this problem - Thanks
  10. If Helix Native / HX Edit crashes or loads with an empty screen on your Windows computer, check to see that your system drive is assigned to Disk 0. We have seen numerous reports of this working for customers running into this problem, as shown in this forum post: https://line6.com/support/topic/49342-hx-edit-281-and-helix-native-starting-with-with-a-blank-screen-and-crash/?do=findComment&comment=330021 The workaround was found and reported by user Camelot_One, and his post goes into detail on checking your drives and ways to rearrange them so that one of them shows as Disk 0. Microsoft Surface Book/Surface Pro users and HX Edit: Some users have reported that ejecting their internal memory card slot on the Surface book/Surface Pro has helped solve this issue. If HX Edit is having trouble opening, it's a possible work-around.
  11. Let's say I bind activate Distortion and change the min/max value of some parameter. Is there any way I can simulate a footswitch press on the Go from PG Edit? Ex: When I click on FS1 button on the "Hide/bypass control" window, it just assigns/resets whatever setting I just changed, (ex; if level was assigned, it'll reset its min to -120dB and max to +20dB) but it doesn't do anything for the current settings; it doesn't turn on/off the distortion and doesn't change the min/max values... So short of getting up, walking 2 meters to POD Go and hitting the footswitch FS1 manually, you can't simulate a footswitch on or off!? Rather annoying that apparently you just can't......
  12. Is anyone else having an error when clicking the link to download Pod Go Edit? I cannot access the one listed in the Downloads section - https://line6.com/software/readeula.html?rid=9622. I have tried on two separate Macbooks and am redirected to a site that says "We're sorry. We encountered an error processing your request."
  13. Is there a version of Edit past 3.06 with support for Mojave OS X 10.14? The 3.06 download says that it's added support for Yosemite, which isn't surprising since that Edit version was released in November '14. Just based on these facts, it seems like a pretty safe bet that 3.06 was the last update. I figured it that I should ask anyways. I can still run Edit and it works with my POD XT, but it made me install Java 6 Runtime before it would open.. now every time I hit a key on the keyboard Edit spits out a Java error. The key strokes work, like when I'm typing into a field, but I have to click out of the error window after every letter! It's a total pain in the lollipop. Maybe it's time to invest in a more current amp simulator?!!?
  14. I've had this LIne 6 Spider Valve mkii HD100 for about 8 years and I love it. However, I've recently gotten back into playing again and I've been looking for the software to be able to edit the presets in the FBV shortboard mkii I'm using in conjunction with the Spider Valve. I'm having an issue finding the software on the line 6 website to be able to edit these presets from my laptop. I'm not sure if it simply doesn't exist any longer or if I am mistaken and simply can't seem to locate it. I currently have the monkey 3 installer and it looks like everything is up to date, other than the controller. However, when I attempt to update it, it prompts me to the Line 6 website base and tells me there is no software for this device. Any and all info would be useful. Thanks!
  15. I got my HD500x today, but I've been trying to download the edit software for the past week... And it will not download. Is anyone else having this problem? Or is there a way around it? Oh and I have a mac.
  16. Q: What is the Spider FX Infusion? A: Spider FX Infusion is offered as a free firmware (1.52) update for all Spider IV (75, 120, 150, 150HD) amplifiers owners with a Line 6 FBV MkII Shortboard„¢ or Express„¢ Controller device. Q: Do I need to have the Mk II version of the FBV Express or shortboard to update the firmware on my Spider IV (75, 120, 150, HD150)? A: Yes, as the previous FBV (Mk I) does not have the USB connection necessary to connect to a computer for the update. You will also need to have the FBV Mk II Express/Shortboard registered to your user account to complete the install. Q: How do I connect my Spider IV (75, 120, 150, HD150) to my computer to perform the firmware update? A: See the following link for the Spider IV update information: Updating the Spider IV (75, 120, 150, 150HD) using the FBV Mk II and Line 6 Monkey Q: What is the Spider IV Edit software? A: The Spider IV Edit software allows you to edit and download tones for your Spider IV amplifier on your computer. See the following link for more information on using the Spider IV Edit software. Spider IV Edit v1.02 FAQs Q: Do I need to calibrate my Expression pedal on my FBV Mk II unit after I perform the firmware upgrade? A: Yes. See the following link for the information on how to calibrate your FBV Mk II pedal (and update the firmware if necessary): FBV/Shortboard/Express/FBV2 Controller: Calibration and F.A.Q.s FBV Mk II (Express and Shortboard) software update Q: What new effect models are included in the Spider FX Infusion firmware update? A: There are 28 new effects in the update 1.51 (there are no changes in the amp modeling). Here are the locations and descriptions of the new effects: FX-1 - Gain Blue Comp: Based on* the Boss® CS-1 Compression Vetta Juice: A Line 6 original originally created for our flagship Vetta II guitar amplifier. Boost & EQ: A stompbox compressor that also provides you with some EQ controls so you can further shape the tone. Screamer: Based on* an Ibanez® Tube Screamer®, the overdrive heard round the world. Killer Z: Based on* Boss® Metal Zone, the industry standard distortion pedal for metal players since 1989. Octave Fuzz: Based on the Tycobrahe Octavia, the classic fuzz+octave effect. Bass Overdrive: Based on* the Tech 21 Bass Sans Amp Clean Sweep: This is a wide range sweeping filter with a slow decay. It’s similar to Auto Wah, but with a band pass filter shape. FX-2 - Chorus/Phaser Analog Chorus: Based on* the Boss® CE-1 Chorus Ensemble. Square Chorus: Based on* the Boss® CE-1 Chorus Ensemble, but with a square wave acting as the magical modulator. Random Chorus: This chorus uses three different modulating filters all running randomly. Jet Flanger: Based on the A/DA Flanger. Lumpy Phase: Kinda like a Uni-Vibe®, but more radical. Warble-Matic: It can produce a nice mild phasey sound or with the depth maxed you can simulate the sound of an alien spacecraft . FX-3 - Delay/ Sweep Echo Analog Delay: Based on* the Boss® DM2 Analog Delay. Stereo Delay: Run this effect post in order to hear it in stereo, with one delay on the left, and another on the right. The time parameter sets the left delay’s time, while offset sets the right delay time as a percentage of the left. So, if you set time to 500ms, and offset to 50%, your right delay time will be 50% of 500ms in other words, 250ms. This effect will be summed in mono on a mono amplifier (i.e. Spider IV 75) but will be in stereo when using the stereo line out. Bubble Echo: Bubble Eko has a Sample and Hold filter on the repeats. A Sample and Hold filter takes a filter sweep (like the one on Sweep Echo), chops it up into little bits and rearranges them semi-randomly. Reverb King Spring Large Plate Small Room Tiled Room Chamber Medium Hall Large Hall Wah Chrome: Based on* a Vox® V847 Colorful: Based on* the wah part of a vintage Colorsound® Wah-Fuzz Weeper: Modeled after* an Arbiter® Cry Baby
  17. Is there a way to show pedalboard mode in helix edit? I would like to be able to toggle between edit mode and an overview of the pedalboard the way it would be laid out. Is it there and i, just not seeing it?
  18. Hello all...............I am just getting back into guitar in my mid-40s after taking a VERY long sabbatical. MUCH has changed during my MANY years off. I just picked up my first electrical guitar last week (a nice Charvel!!) but have NOT purchased an amp yet. Having owned MANY JMP45s back in the day as well as Rivera Knuckleheads (killer cleans), plus cabinets, not to mention a couple of racks full of rack mounted gear (Rocktron, Soldano, VHT, etc), I know how expensive AND expansive gear can quickly become when you don't want just one tone but rather ALL tones!! My primary influences were the glam hair bands of the 80s (Def Leppard, Tesla, Cinderella, Poison, etc) as well as classic rock (Bad Company, Free, AC/DC) etc but I LOVE clean sounds and some heavy Metallica like sounds as well. Part of what appeals to me is the ability of the community to create and share. Being able to download tones created by others is very appealing when you seek various tonal qualities. My playing will probably just be confined to home for personal enjoyment/relaxation only. I don't see doing gigs in my future. Been there done that. So, I don't think I need nor can I afford a room full of Marshalls, Mesas, Bogners, Soldanos, Diesels, etc. I can't believe I might be able to get a boat load of tones from a modeler now. Modelers had (*IMHO*) very little real world use (*such as practice when you were traveling and couldn't have your amps with you) when they first came out. Now, I am excited to think I might be able to actually do this and keep it to one room of the house, not break the bank, AND be happy with having MANY GOOD (if not EXCELLENT) tones. I was lucky to find Glenn Delaune's YouTube video and his custom artist presets. The quality and range of tones in his video are what is driving me towards Line 6. However, I really like the idea of keeping my gear in a rack (otherwise, it will be everywhere because, well, frankly, I'm just a slob). Therefore, I would prefer an HD Pro, but have not ruled out the HD500/HD500X. HERE is my question (finally, you long winded dirtbag!): will custom artist presets created for the HD500 and/or HD500X work on the HD Pro rack mount modeler? I have read that all of the HD, HD500, HD Pro and HD 500X presets are all interchangable by simply renaming the file extension. .hbe (bean) .h5e (HD500) .5Xe (HD500X )or .hre (POD HD Pro) so they would probably work but I would like to confirm. Does anyone know? Is this a factual assumption? I would prefer to keep everything racked if possible. However, if they do not, then I am looking at a used HD500 or possibly HD500X. I wasn't sure if there was any technical differences in the rackmount Pro and the floor model 500/500x that would allow or prevent patches from one to work on the other. Thanks in advance!! Looking forward to getting back into this!!!!
  19. Q: What is Spider Edit? A: Spider Edit is offered as a free software editor for all Spider IV (75, 120, 150, 150HD) amplifiers owners. Spider Edit required USB connection to a computer using a Line 6 FBV Shortboard MkII or FBV Express MkII Series Controller device and CAT-5 connection to a Spider IV amplifier. Q: Do I need to have version 1.52 (or later) firmware installed on my Spider IV amplifier to use Spider Edit? A: Yes, firmware version 1.52 is necessary to interface with Spider Edit. Q: Where can I download Spider Edit? Spider IV Edit Download Q: How Can I get the Spider Edit Manual? A: You can select the F1 key when using the Spider Edit program. Q: Can I share Spider IV tones using Customtone? A: Yes, here is the direct link to the Spider IV customtone sharing site: Customtone Q: Can I edit the artist, song or style-based presets using Spider Edit? A: Spider Edit can only see the User bank, so you will need to store song presets in the user bank area before making edits. Q: Why am I seeing an asterisk in the patch title when I change a parameter in a preset? A: An asterisk will show preset that has been edited, and will need to be saved either on the computer or the amp to make the change permanent. Q: What is the file extension for files that will load into Spider Edit? A: Spider Edit will be able to accept the .s4e(single patch) and .s4b (bundles) file extensions . Q: Can I use the FBV Mk II to control the Spider IV when I am using the FBV contoller to interface with Spider Edit? A: The FBV controller cannot function as an amp controller when being used as an interface for Spider Edit. Q: Can I import multiple tone patches at once? A: You can import single tone patches or bundles at once, but not multiple single patches simultaniously. Q: Can I change the global (Auto FX, MIDI, Loop routing, etc.) parameters in Spider Edit? A: Global parameters can be changed on the amp, but cannot be controlled by the editor. Q: Are there any know issues with Spider IV Edit v1.02? A: There are some late breaking known issues with Spider IV Edit v1.02. We are aware of them and working on fixes. * The graphic representation of Pre/Post in the Signal Flow window at the top of Spider IV Edit v.1.02 can occasionally be out of sync with the preset currently loaded and may appear dimmed. The Pre/Post position is accurate in the Edit panes and the Spider IV amp, and can be 're-synced' with the Signal Flow window by toggling the Pre/Post switch. * If when clicking and dragging a preset in the Presets pane, the Preset is 'dropped' outside of the Presets window, the scroll bar may begin to behave erratically. Completing another click and drag to a 'legal' location, i.e. your computer's desktop or another location in the Presets window restores the scroll bar to its proper function.
  20. Deutsch Français Important Note: It is highly recommended that these updates are installed in a specific sequence. Please see the installation notes* below. Bug Fixes These updates address a bug which allows invalid data to be introduced to presets. The invalid data is caused by asynchronous communication between the POD HD/HD500/HD Pro hardware device and the POD HD/HD500/HD Pro Edit software application. In rare instances, recalling presets containing invalid data may cause intermittent high volume events. Installing POD HD/HD500/HD Pro firmware v2.62 and POD HD/HD500/HD Pro Edit v2.26 prevents invalid data from being introduced into presets. During synchronization between POD HD/HD500/HD Pro and POD HD/HD500/HD Pro Edit, the hardware displays a ‘Sync In Progress’ message and does not respond to any buttons or knobs until synchronization is complete. Additionally, any presets which contain invalid data are reset to an initialized state. These presets are easily identified as ‘New Tone (Reset)’. *Installation Notes Please follow these steps sequentially: Disconnect any audio connections to the POD HD/HD500/HD Pro, connect to the computer via USB and save a preset Bundle, Set Lists, or individual presets from POD HD/HD500/HD Pro Edit v1.06 (if you do not wish to save any existing presets you may skip this step) Quit the POD HD/HD500/HD Pro Edit app and launch Line 6 Monkey to install POD HD/HD500/HD Pro Edit v2.26 Complete the POD HD/HD500/HD Pro Edit installation and launch Monkey once again to install POD HD/HD500/HD Pro Flash Memory v2.62 During the installation, Monkey will ask if you want to keep your presets, click ‘No’, and complete the installation following the on-screen instructions. On the POD HD500, you *must* reset the global setup options which includes resetting the Setlist names and pedal calibration by: Disconnect the USB cable connection between HD500 and host computer. Power off the POD HD500. Power on the POD HD500 while holding the LEFT ARROW [*] If you do not do this, one of the tell-tale symptoms that may surface after a Monkey Flash Memory update is that the HD500 will be stuck in a continuous re-boot/power cycling state (you'll keep seeing the Logo and the unit keeps re-starting itself). Sometimes this may not occur, but a secondary telltale sign that a user has not performed a Global Settings reset is the USB communication between the HD500 and HD500 Edit software will be extremely slow/sluggish. ***NOTE: Please also make sure to re-calibrate the onboard expression pedal of the HD500 after performing the Global Settings reset. Instructions: How to calibrate the POD HD500X\HD500 Expression Pedal. [*]Launch POD HD/HD500/HD Pro Edit to restore any saved presets. **Please note that any previously saved presets that were corrupted in any way will be discarded and set to New Tone (Reset) once imported into POD HD/HD500/HD Pro Edit 2.00. For more information about POD HD/HD500/HD Pro, visit our POD HD500X\HD500\POD HD\POD HD Pro FAQ. Advanced User's Guide The latest version of the Advanced User's Guide for the POD HD500 can be found here. Instructions de la mise à jour version 2.02 de la firmware POD HD500X/HD500/HD/HD Pro et version 2.00 du logiciel POD HD/HD500/HD Pro Edit Note importante: Nous recommandons d'installer ces mises à jour dans une séquence spécifique. Veuillez visiter les notes d'installation* au-dessous svp. Corrections d'erreurs: Ces mises à jour corrigent des erreurs qui permettent des données non valides d'être introduits dans les presets. Les données non valides sont causées à cause d'une communication asynchrone entre le POD HD/HD500/HD Pro et le logiciel Edit. Dans cas très rares, l'utilisation des presets qui ont des données non valides dedans, cause des événements intermittents à volume élevé. En installant la version 2.02 de la firmware POD HD/HD500/HD Pro et la version 2.00 de l'Edit de POD HD/HD500/HD Pro, vous bloquez les données non valides d'entrer les presets. Pendant la synchronisation entre POD HD/HD500/HD Pro et le logiciel Edit du POD HD/HD500/HD Pro, l'appareil vous montre le message "Sync In Progress" et ne répond pas aux boutons jusqu'à ce que la synchronisation ait terminée. Les presets avec des données non valides dedans seront réinitialisés. Ces presets ressemblent à ceci: "New Tone (Reset)". *Notes d'installation: Suivez ces étapes une par une: Déconnectez tous les connexions audio du POD HD/HD500/HD Pro. Connectez à l'ordinateur via USB et enregistrez des presets Bundle, Set Lists ou les presets individuels du POD HD/HD500/HD Pro Edit de la version 1.06. (Si vous ne voulez pas enregistrer des presets, passez cette étape. Fermez le programme POD HD/HD500/HD Pro Edit et lancez Line 6 Monkey pour installer la version 2.00 du logiciel POD HD/HD500/HD Pro Edit. Complétez l'installation du logiciel POD HD/HD500/HD Pro Edit et lancez Line 6 Monkey encore une fois pour installer la version 2.02 de POD HD/HD500/HD Pro Flash Memory. Pendant l'installation, Monkey vous demandera si vous voulez garder vos presets, cliquez "No" et complétez l'installation en suivant les instructions sur l'écran. Pour le POD HD500, vous devez réinitialiser les options "Global Setup". Déconnectez le câble USB entre HD500 et ordinateur. Éteignez le HD500. Allumez le HD500 en maintenant la flèche gauche ( [*]Si vous ne réinitialisez pas le HD500, mais mettez à jour le firmware, le HD500 s'éteint et redémarre infiniment. Si cette erreur ne se produit pas, une erreur sera que la communication USB entre HD500 et HD500 Edit est extrêmement lente. Attention, après vous avez réinitialisé les Global Settings, vous devez recalibrer le pédale. Vous pouvez trouver les instructions ici. [*]Démarrez POD HD/HD500/HD Pro Edit pour restaurer les presets enregistrés. **Attention, les presets enregistrés qui étaient corrompus sont renommé New Tone (Reset) si vous l'importez dans POD HD/HD500/HD Pro Edit de la version 2.00. Pour plus d'informations sur POD HD/HD500/HD Pro, visitez POD HD500X\HD500\POD HD\POD HD Pro FAQ. Guide de l'utilisateur avancé: Vous pouvez trouver la version plus récente du guide pour les utilisateurs expert pour les appareils Line 6 ici. Aktualisierungsanweisungen zur POD HD500X/HD500/HD/HD Pro Firmware Version 2.02 und POD HD/HD500/HD Pro Edit Version 2.00 Achtung: Wir empfehlen, dass Sie diese Aktualisierungen in einer spezifischen Sequenz durchführen. Bitte schauen Sie sich dazu die Installationshinweise* unten an. Fehlerbehebungen: Diese Aktualisierungen beheben einen Fehler, der es fehlerhaften Daten erlaubt in Presets abgespeichert zu werden. Die fehlerhaften Daten entstehen aufgrund einer asynchronen Kommunikation zwischen dem POD HD/HD500/HD Pro Gerät und der POD HD/HD500/HD Pro Edit Software. In seltenen Fällen verursachte der Abruf der fehlerhaften Presets zeitweise Ereignisse sehr hoher Lautstärke. Die Installation der POD HD500X/HD500/HD/HD Pro Firmware Version 2.02 und POD HD/HD500/HD Pro Edit Version 2.00 hält diese fehlerhaften Daten davon ab, in das Preset zu gelangen. Während der Synchronisierung zwischen HD500X/HD500/HD/HD Pro und POD HD/HD500/HD Pro Edit zeigt Ihnen das Gerät "Sync In Progress" an und reagiert nicht auf Knopfdrücke bis die Synchronisation vollendet ist. Zusätzlich werden alle Presets, die fehlerhafte Daten bereits enthalten, zurückgesetzt. Diese Presets sehen dann so aus: "New Tone (Reset)". *Installationshinweise: Bitte folgen Sie diesen Etapen der Reihe nach: Trennen Sie alle Audioverbindungen von Ihrem POD HD/HD500/HD Pro, stecken Sie es nun an den Computer via USB und speichern Sie ein Preset für Bundle, Set Lists oder individuelle Presets Ihrer POD HD/HD500/HD Pro Edit Software V1.06 ab. (Wenn Sie keine Presets abspeichern wollen, dann können Sie diesen Schritt überpsringen.) Schließen Sie die POD HD/HD500/HD Pro Edit Software und starten Sie Line 6 Monkey um POD HD/HD500/HD Pro Edit 2.00 zu installieren. Beenden Sie die installation von POD HD/HD500/HD Pro Edit 2.00 und starten Sie Line 6 Monkey nocheinmal um diesmal POD HD/HD500/HD Pro Flash Memory 2.02 zu installieren. Währender dieser Installation wird Monkey Sie fragen, ob Sie Ihre Prsets behalten wollen. Klicken Sie "No" und schließen Sie die Installation ab indem Sie den Anweisungen auf dem Bildschirm folgen. Auf dem POD HD500 müssen Sie die Global Settings zurücksetzen. Indem Sie: Die USB Kabel entfernen zwischen HD500 und Computer. Das HD500 abschalten. Das HD500 wieder starten während Sie die linke Pfeiltaste ( [*]Wenn Sie dies nicht tun, eines der Symptome nach dem Update könnte sein, dass das HD500 sich unendlich oft neustartet/abschaltet. Manchmal passiert das nicht, aber ein zweites Symptom ist eine extrem langsame USB-Kommunikation zwischen HD500 und HD500 Edit. Achtung, Sie müssen nach dem Reset auch das Pedal des HD500 neu kalibrieren. Anweisungen dazu können Sie hier finden. [*]Starten Sie nun POD HD/HD500/HD Pro Edit um abgespeicherte Presets wiederherzustellen. Achtung, vorher abgespeicherte Presets, die korrupt waren, werden umbennant in New Tone (Reset) sobald diese in POD HD/HD500/HD Pro Edit 2.00 importiert werden. Für weitere Informationen über POD HD/HD500/HD Pro, besuchen sie bitte unser POD HD500X\HD500\POD HD\POD HD Pro FAQ. Handbuch für Fortgeschrittene: Die neuste Version der Handbuchs für Line 6 Produkte können Sie hier finden.
  21. I recently bought a used POD HD300 and I use the POD HD300 Edit software on OSX High Sierra with no problem. There is however an OSX update to Mojave and I do not know if I updated the OS would the POD HD300 Edit still work. Mojave is not mentioned in the supported OS list of the latest 2.03 (10/14/14) version of the Edit software. Is there anyone who has OSX Mojave with a usable POD HD300 Edit out there?
  22. Hello, I'm new here. I was hoping to get some help with my Helix Native install and Helix Floor pedal. I just discovered HX Edit this afternoon and very much enjoyed how both the pedal and the software are synced. I was surprised and disappointed to find that this same configuration didn't port over to Helix Native on launch. I came from a Guitar Rig setup where the pedal could navigate and interact with the plugin. I didn't put much effort into that pedal, so I was kind of expecting the same results. Can anyone tell me how make Helix Native sync up like HX Edit does in FL Studio with my Helix Floor pedal? Thank you kindly for your help!
  23. I have a pod 2.0 and a maudio interface. Can anyone please tell me how to connect my pod2.0 to pc to use custom tone?
  24. Francais Deutsch Q: What is Line 6 Edit? A: Line 6 Edit is a free software application from Line 6 that provides complete editor/librarian features for the following products: POD XT/XTLive/Pro Bass POD XT/XTLive/Pro Vetta II Combo/Head Flextone II/III HD 147 POD 2.0/Pro Note: Vetta II Combo/Head, HD 147, Flextone II/III, POD 2.0/Pro users will need a MIDI interface and cables to use it. We recommend the M-Audio MIDIsport Uno if you do not already have a MIDI to USB device. We recommend installing the MIDI interface drivers directly from the manufacturer's website to ensure you have the latest drivers for your OS. Midisport Uno IMPORTANT: Line 6 Edit is a Java based application, and will run on Macintosh OS X (10.1x-10.5.x) and any Windows OS that can run any version of Java 5 (the latest update is 21). Be aware that using an earlier version of Line 6 Edit will not launch if ANY Java Runtime 6 Environment components are installed. LINE 6 EDIT is available for download here: Software Downloads Line 6 Edit software even translates tones between selected products:[/font][/size] Vetta II will be able to use GuitarPort, PODxt, Flextone III, HD 147 or POD 2.0 Tones. Flextone III and HD 147 will be able to use GuitarPort, PODxt or POD 2.0 Tones. PODxt units will be able to use Flextone III, HD 147, POD 2.0 and, of course, GuitarPort Tones. Q: I'm getting an error message saying "Cannot copy to POD XT Live because it is a POD 2.0 tone". A: The way around this is to use Gearbox (free download from http://line6.com/software/) to open the tone once you transfer it from the POD Pro to the tone folder on your computer. With POD Pro connected, transfer all the tones you want to the tones folder on your computer using Edit. Disconnect POD Pro and connect POD XT. Open Gearbox. Open a POD Pro/2.0 tone in Gearbox. Save the tone to your computer in whatever location you want. Close Gearbox and open Edit Locate tone and transfer into POD XT via Sync button Q: I am getting a Java Error when I try to run Line 6 Edit? A: See the following link for resolution: Resolving Java Errors with Line 6 Edit and Workbench Q: How do I set up my Line 6 device using MIDI to connect with Line 6 Edit? 1) Please ensure that you have the interface's latest drivers installed on your computer. We recommend downloading the drivers directly from the manufacturer's website and installing the drivers BEFORE connecting your USB-MIDI interface. Consult the manufacturer's website for the correct installation and troubleshooting procedures to ensure your drivers are installed correctly. 2) Connect your Line 6 device to the MIDI Interface, making sure the cables are connected correctly. Traditional MIDI connections will have the Line 6 device MIDI IN to interface MIDI OUT, and the Line 6 device MIDI OUT to interface MIDI IN. The MIDIsport Uno will be labeled "to MIDI in" and "to MIDI out". 3) Turn your Line 6 device ON, then open Line 6 Edit. We will use a Vetta II head for these screen examples: 4) If your unit is not being recognized by your computer, select "configure": 5) In the MIDI devices window, select "add": 6) Under the MIDI in port, select your USB to MIDI device: 7) Under the MIDI out port, select your USB to MIDI device: 8) You can leave the device window in "auto detect" or choose the device you plan to use. Once this is completed, select "add": 9) When your device appears in the window, select "OK": 10) Once your device is selected, your computer will import the tones that are currently installed on your device. Do not change any settings or or turn your unit off during the information transfer: 11) Line 6 Edit will now display the tones and bundles currently installed on your computer on the left side of the window, while displaying the tones installed on the Line 6 unit on the right side of the computer. If you need help navigating the features of Line 6 Edit, select the help menu for assistance in connections, backing up your tones, and importing tones. Q: What is Customtone? A: Customtone features a gigantic Line 6-authored library filled with selected tones from the vast treasure trove of GuitarPort Online, including tones matched to many of the greatest classic and new guitarists, bands and songs. Customtone is also a great place to share your tones with other Line 6 end users. You can access Customtone here: Customtone Q: I Get an error message when trying to access the Online Library through Line 6 Edit? A: This is a bug in the Line 6 Edit software that has not been resolved. Please visit the link above to connect to the Customtone website. Line 6 Edit: F.A.Q. Was ist Line 6 Edit? Line 6 Edit ist eine gratis Software von Line 6, die vollständige Bearbeitungs- und Bibliotheksmermale für die folgenden Produkte bietet: POD XT/XTLive/Pro Bass POD XT/XTLive/Pro Vetta II Combo/Head Flextone II/III HD 147 POD 2.0/Pro Achtung, Benutzer des Vetta II Combe/Head, HD 147, Flextone II/III, POD 2.0/Pro brauchen eine MIDI Schnittstelle und Kabel um dieses zu benutzen. Wir empfehlen das M-Audio MIDIsport Uno, sofern Sie noch keinen USB-MIDI Adapter haben. Wir empfehlen außerdem, die Treiber immer von der Webseite des Herstellers zu installieren, so haben Sie immer die neusten Treiber für Ihr Betriebssytsem. Midisport Uno Achtung, Line 6 Edit ist ein auf Java basierendes Programm und wird auf allen Mac OS X (10.1x – 10.5.x) und Windows Betriebssystemen, die Java Version 5 installiert haben (Die neuste Version ist 25) laufen. Achtung, eine frühere Version von Line 6 Edit wird nicht funktionieren wenn Java Runtime 6 Environment Komponenten installiert sind. Line 6 Edit können Sie hier herunterladen. Line 6 Edit kann sogar Töne zwischen verschiedenen Geräten übertragen: Vetta II kann die Töne von GuitarPort, PODxt, Flextone III, HD 147 or POD 2.0 benutzen. Flextone III und HD 147 können die Töne von GuitarPort, PODxt or POD 2.0 benutzen. PODxt können die Töne von Flextone III, HD 147, POD 2.0 und GuitarPort benutzen. Ich bekomme die Fehlermeldung: "Cannot copy to POD XT Live because it is a POD 2.0 tone" Zur Problemlösung brauchen Sie Gearbox (gratis download auf http://line6.com/software/) um die Töne zu öffnen nachdem Sie sie vom POD Pro in den Tones Ordner auf Ihrem Computer kopiert haben. Schließen Sie das POD Pro an. Kopieren Sie all Töne, die Sie benutzen wollen, in den Tones Ordner auf Ihrem Computer anhand von Edit. Trennen Sie nun das POD Pro vom Computer und schließen Sie das POD XT an. Öffnen Sie Gearbox. Öffnen Sie einen POD Pro/2.0 Ton in Gearbox. Speichern Sie den Ton dann auf Ihrem Computer ab. Schließen Sie Gearbox und starten Sie Edit. Suchen Sie den Ton und übertragen Sie ihn auf das POD xt via Sync Knopf. Ich bekomme einen Java Fehler wenn ich Line 6 Edit starte. Benutzen Sie zur Problemlösung folgenden Link: Java Errors with Line 6 Edit and Workbench on Windows Operating Systems Wie konfiguriere ich mein Line 6 Gerät um es via MIDI mit Line 6 Edit zu verbinden? Als erstes sollten Sie überprüfen ob Sie die neuste Version des Treibers der Schnittstelle installiert haben. Wir empfehlen, dass Sie diesen direkt von der Webseite des Herstellers herunterladen und installieren, BEVOR Sie die MIDI-USB Schnittstelle anschließen. Konsultieren Sie die Webseite des Herstellers für die korrekte Installation und Fehlerbehebungen. Verbinden Sie Ihr Line 6 Gerät mit Ihrer MIDI Schnittstelle. Achten Sie darauf, dass die Kabel korrekt eingesteckt sind. Bei standardmäßigen MIDI Schnittstellen muss der MIDI Eingang des Line 6 Gerätes an den MIDI Ausgang des MIDI Gerätes gesteckt werden und der MIDI Ausgang des Line 6 Gerätes and den MIDI Eingang des MIDI Gerätes. Starten Sie Ihr Line 6 Gerät und öffnen Sie Line 6 Edit. Wir benutzen für dieses Beispiel das Vetta II Head: Sollte Ihr Gerät nicht vom Computer erkannt werden, klicken Sie "Configure": Im MIDI Auswahlfenster klicken Sie "Add": Unter MIDI In Port wählen Sie Ihr USB-MIDI Gerät: Unter MIDI Out Port wählen Sie Ihr MIDI-USB Gerät: Das "Device" Menu können Sie dann auf "auto detect" stehen lassen oder das Gerät aussuchen, welches Sie benutzen wollen. Danach klicken Sie auf "Add": Wenn Ihr Gerät dann auftaucht, wählen Sie es aus und klicken Sie "OK": Dann wird Ihr Computer die Töne des Gerätes importieren, die momentan auf dem Gerät installiert sind. Ändern Sie während des Transfers keine Einstellungen und schalten Sie das Gerät nicht ab. Line 6 Edit wird Ihnen nun die Töne und Pakete, die auf Ihrem Compuer installiert sind, links anzeigen und die Töne, die auf Ihrem Line 6 Gerät installiert sind, rechts. Wenn Sie hier Hilfe benötigen klicken Sie bitte das Hilfe Menu an um Hilfestellungen bezüglich Verbindungen, Backup und Import zu bekommen. Was ist Customtone? Customtone ist eine gigantische Bibliothek gefüllt mit ausgewählten Tönen der riesigen GuitarPort Online Liste. Sie enthält viele der größten Klassiker und auch neue Gitarren, Bands und Songs. Customtone ist außderdem ein toller Platz um Töne mit anderen Line 6 Benutzern austauschen zu können. Customtone Ich bekomme eine Fehlermeldung wenn ich versuche auf die Online Bibliothek ("Online Library") via Line 6 Edit zuzugreifen. Dies ist ein Fehler in der Line 6 Edit Software und ist bis jetzt noch nicht behoben worden. Bitte besuchen Sie Customtone über den oben genannten Link anstatt über die Software. F.A.Q.: Line 6 Edit Qu'est-ce que c'est, Line 6 Edit? Line 6 Edit est le logiciel gratuit de Line 6 qui fournisse des fonctionnalités complètes d'édition et bibliothèque pour les produits suivants: POD XT/XTLive/Pro Bass POD XT/XTLive/Pro Vetta II Combo/Head Flextone II/III HD 147 POD 2.0/Pro Attention, les utilisateurs Vetta II Combo/Head, HD 147, Flextone II/III, POD 2.0/Pro ont besoin d'une interface MIDI et câbles pour l'utilisation. Nous recommandons me M-Audio MIDIsport Uno si vous n'avez pas encore une interface MIDI-USB. Nous recommandons d'installer les pilotes d'interface directement du site web du fabricant pour avoir la dernière version pour votre système d'exploitation. Midisport Uno Important: Line 6 Edit est un logiciel basé sur Java et fonctionne sur Mac OS X (10.1x-10.5.x) et tous les systèmes d'exploitation Windows qui peuvent exécuter Java 5 (La dernière version sera 25). Les versions anciennes de Line 6 Edit ne fonctionnent pas si Java Runtime 6 Environment est installé. Line 6 Edit est disponible: Téléchargements de logiciels. Line 6 Edit peut transférer des tons entre ces produits: Vetta II peut utiliser des sons de GuitarPort, PODxt, Flextone III, HD 147 ou POD 2.0. Flextone II et HD 147 peuvent utiliser des tons de GuitarPort, PODxt et POD 2.0. PODxt peut utiliser les sons de Flextone III, HD 147, POD 2.0 et GuitarPort. Je reçois le message "Cannot copy to POD XT Live because it is a POD 2.0 tone". Pour résoudre ce problème, vous devez utiliser Gearbox (Téléchargement gratuit de http://fr.line6.com/software/) pour ouvrir le son si vous l'avez transféré du POD Pro au dossier des sons sur votre ordinateur. Si POD Pro est connecté, transférez tous les sons, que vous voulez, au dossier des sons sur votre ordinateur en utilisant Edit. Déconnectez POD Pro et connectez POD XT. Ouvrez Gearbox. Ouvrez un ton POD Pro/2.0 en Gearbox. Enregistrez le son sur votre ordinateur. Fermez Gearbox et ouvrez Edit. Localisez le son et transférez-le sur votre POD XT via le bouton Sync. Je reçois une erreur Java si j'essaye de lancer Line 6 Edit. Veuillez utiliser le lien suivant pour résoudre ce problème: Java Errors with Line 6 Edit and Workbench on Windows Operating Systems Comment est-ce que je peux configurer mes appareils Line 6 MIDI pour l'utilisation avec Line 6 Edit? Installez les dernières pilotes de l'interface sur votre ordinateur. Nous recommandons de les télécharger directement du site web du fabricant et les installer AVANT que vous connectez l'interface USB-MIDI. Consultez le site web du fabricant pour l'installation correcte et pour résoudre des problèmes. Connectez votre appareil Line 6 à l'interface MIDI. Les câbles doivent être connectés correctement. Les connexions MIDI traditionnels seront: appareil Line 6 MIDI IN à interface MIDI OUT et l'appareil Line 6 MIDI OUT à interface MIDI IN. Le MIDI sport Uno sera étiqueté "to MIDI on" et "to MIDI out". Allumez votre appareil Line 6 et ouvrez Line 6 Edit. Nous utilisons Vetta II Head pour cet exemple: Si l'appareil n'est pas reconnu par le système, cliquez "Configure". Dans la fenêtre des appareils MIDI, cliquez "Add". Sous "MIDI In Port", sélectez votre appareil USB-MIDI: Sous "MIDI Out Port", sélectez votre appareil USB-MIDI: Vous pouvez laisser le menu "Device" sur "Auto Detect" ou choisissez l'appareil vous voulez utiliser. Cliquez "Add". Si votre appareil apparait, sélectez le et cliquez "OK". Si l'ordinateur reconnait l'appareil, il importe les sons qui sont installés sur l'appareil. Ne changez rien out éteignez l'appareil pendant ce transfert des informations. Line 6 Edit vous montre les sons et paquets installés sur l'ordinateur sur le côté gauche de la fenêtre et les tons installés sur l'appareil sur le côté droite de la fenêtre. Si vous avez besoin d'aide avec la navigation, cliquez le menu d'aide pour les informations de la connexion, sauvegarde et import. Qu'est-ce que c'est, Customtone? Customtone figure une bibliothèque gigantesque des sons sélectés de l'immense liste de GuitarPort Online, cette liste inclus des sons des plus grands classiques mais aussi des nouvelles guitares, groupes et chansons. Customtone est aussi un endroit idéal pour partager vos tons avec autres utilisateurs Line 6. Customtone Je reçois un message erreur si j'essaye d'accéder la bibliothèque en ligne via Line 6 Edit. C'est un bug dans le logiciel Line 6 Edit qui n'a pas encore eu résous. Veuillez utiliser le lien au-dessus.
  25. I'm having connection problems with my POD XT; my computer isn't recognizing that it's plugged in. It doesn't happen 100% of the time (maybe 50/50), but often enough to be a major pain in my lollipop. I've tried multiple different USB cables, all the USB ports on my computer, reboots, etc. The only times I've been able to get it recognized is when I turn off the POD, shutdown the computer, turn on the POD and then turn on the computer. This only works around 60-70% of the time. I attached a screenshot of the error message window that pops up in the Edit Software. Any suggestions? Thanks!
×
×
  • Create New...