Jump to content

Search the Community

Showing results for tags 'pod'.



More search options

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Content Type


Forums

  • Community Support
    • Multi-Effects Units
    • Variax Instruments
    • Amplifiers
    • Computer Based Recording
    • Live Sound
    • Pedals/Controllers
    • Dream Rig - Line 6 Product Integration
  • General Discussion
    • Share your Settings
    • Line 6 Lounge

Categories

  • General FAQ
  • Tutorial Videos
  • Effects/Controllers
    • HELIX/HX
    • Firehawk
    • FBV Controllers (MKI / MKII/ 3)
    • M5 / M9 / M13
    • JM4 Looper
    • Stompbox Modelers / ToneCore
    • ToneCore Development Kit
  • Recording
    • Helix Native
    • Echo Farm/Amp Farm
    • POD Farm / POD Studio / TonePort
    • Computer Audio Set Up and Troubleshooting
    • Riffworks Line 6 / Standard Edition
  • POD
    • POD Go
    • POD HD Family
    • POD HD500/HD500X
    • POD HD300/400
    • POD X3 Family
    • POD 2.0 / PODxt Family / Pocket POD / FloorPODs
  • AMPLIFi Series Products
    • AMPLIFi 30/75/150/TT
    • AMPLIFi FX100
    • Videos
    • Tone Creation
  • Amplifiers
    • Spider V
    • Powercab
    • Firehawk 1500
    • DT50/DT25
    • Spider IV/Spider Online
    • Spider Valve
    • Spider Jam
    • Vetta
  • Wireless
  • Live Sound
    • Relay/XD-V Digital Wireless
    • StageScape M20d Mixer
    • StageSource Speaker
  • Guitars
    • JTV / Shuriken / Variax Standard / Workbench HD
    • 1st Gen Variax Guitars / Bass / Workbench
  • Mobile Products
    • Sonic Port devices / Mobile In
    • Mobile Keys
    • MIDI Mobilizer
    • Mobile POD app
  • Dream Rig
  • Legacy Products
    • Amps
    • POD
    • Effects and Controllers
    • GearBox
    • Line 6 X2 Digital Wireless

Find results in...

Find results that contain...


Date Created

  • Start

    End


Last Updated

  • Start

    End


Filter by number of...

Joined

  • Start

    End


Group


AIM


MSN


Website URL


ICQ


Yahoo


Jabber


Skype


Location


Interests


Registered Products

Found 456 results

  1. Hi.. I am a midlevel guitar player.. I want to buy a multieffects for play worship at the church.. i dont have enough money for get a Helix.. my budget is around $650... I want to know wish one between pod hd 500x and pod.go will you recommends for play it at church... Thanks
  2. I just bought a pod go and was looking at which headphones to buy. Looking at the FAQ it says the headphone impedance output is 63 ohms?? That can't possibly be right can it? The helix floor is 12 ohms. Why is the pod go more than 5 times higher? Using the rule of 8, that would mean you need to use headphones with over 500 ohm load with the entry level pod. Did the FAQ mean we should use headphones with over 63 ohms? I'm really confused.
  3. Hello! I want to use my POD HD500 as an audio interface to record my acoustic guitar using the guitar/aux input. I use USB to connect the POD to the computer. In this case, what would be the most correct way to use it: should I create an empty preset or use it in Bypass (tuner)? Thank you! Regards, Rafael
  4. I got one bass pod xt live,but i dont know how to set it . and also i cannt find the link where can download the manuals Who can send it or tell me the link? Tks
  5. Hi All Do we have any POD repair experience on this forum? My POD 2 (FBV) is flashing a particular sequence on start-up and the voltage on the DC regulators is oscillating up and down. Interestingly, if I put into Test mode and run all the tests it has stable DC voltages and passes most of them bar the potentiometer range tests. Any help appreciated from anyone who has done low-level POD circuit troubleshooting. Cheers
  6. On the POD HD500X, is there a way to move (or maybe copy and paste) a preset from one setlist to another? I want to gather the presets I use most often together into one of the empty user setlists, so I don't have to move back and forth between different setlists all the time. The manual shows how to move a preset within a setlist, but not how to move it to a different setlist. Can this be done?
  7. Hello! My setup: POD HD 500 and Dell Inspiron 15 500 i7 8GBRAM Drivers: The most recently drivers by Monkey Line 6. Problem: The problem always happen when I connect my POD on my computer. After a few minutes the BSOD comes and the errors are the following: Stop code: IRQL_NOT_OR_EQUAL or Stop code: SYSTEM_SERVICE_EXCEPTION - What failed: L6PODHD564.sys I run a program to see more information (Log at the bottom). My attempts: -Restart the system. -Uninstall and reinstall all drivers. -Update the firmware of POD HD 500 -Remove all USB connections and keep only the POD HD Crash Dump Analysis Crash dumps are enabled on your computer. Crash dump directories: C:\WINDOWS C:\WINDOWS\Minidump On Fri 28-Aug-20 12:23:13 PM your computer crashed or a problem was reported crash dump file: C:\WINDOWS\Minidump\082820-49578-01.dmp This was probably caused by the following module: l6podhd564.sys (0xFFFFF8037EEE2FBE) Bugcheck code: 0x3B (0xC0000005, 0xFFFFF8037EEE2FBE, 0xFFFFD80A8638A900, 0x0) Error: SYSTEM_SERVICE_EXCEPTION file path: C:\WINDOWS\system32\drivers\l6podhd564.sys product: GuitarPort company: Line 6 description: GuitarPort WDM Audio Device Driver Bug check description: This indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code. This appears to be a typical software driver bug and is not likely to be caused by a hardware problem. A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: l6podhd564.sys (GuitarPort WDM Audio Device Driver, Line 6). Google query: l6podhd564.sys Line 6 SYSTEM_SERVICE_EXCEPTION On Fri 28-Aug-20 12:23:13 PM your computer crashed or a problem was reported crash dump file: C:\WINDOWS\MEMORY.DMP This was probably caused by the following module: stream.sys (STREAM+0x1F61) Bugcheck code: 0x3B (0xC0000005, 0xFFFFF8037EEE2FBE, 0xFFFFD80A8638A900, 0x0) Error: SYSTEM_SERVICE_EXCEPTION file path: C:\WINDOWS\system32\drivers\stream.sys product: Microsoft® Windows® Operating System company: Microsoft Corporation description: WDM CODEC Class Device Driver 2.0 Bug check description: This indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code. This appears to be a typical software driver bug and is not likely to be caused by a hardware problem. The crash took place in a Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time. On Fri 28-Aug-20 11:41:45 AM your computer crashed or a problem was reported crash dump file: C:\WINDOWS\Minidump\082820-67500-01.dmp This was probably caused by the following module: ucx01000.sys (0xFFFFF8035D6D5C93) Bugcheck code: 0x10D (0x4, 0x0, 0xFFFFF8035D6D5C93, 0xFFFF9E0CB62C0DB0) Error: WDF_VIOLATION file path: C:\WINDOWS\system32\drivers\ucx01000.sys product: Microsoft® Windows® Operating System company: Microsoft Corporation description: USB Controller Extension Bug check description: This indicates that Kernel-Mode Driver Framework (KMDF) detected that Windows found an error in a framework-based driver. This bug check belongs to the crash dump test that you have performed with WhoCrashed or other software. It means that a crash dump file was properly written out. The crash took place in a Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time. On Thu 27-Aug-20 11:09:13 PM your computer crashed or a problem was reported crash dump file: C:\WINDOWS\Minidump\082720-63328-01.dmp This was probably caused by the following module: ntoskrnl.exe (nt+0x1C23C0) Bugcheck code: 0xA (0xFFFF8705DEC6E022, 0x2, 0x0, 0xFFFFF80275EAABF2) Error: IRQL_NOT_LESS_OR_EQUAL file path: C:\WINDOWS\system32\ntoskrnl.exe product: Microsoft® Windows® Operating System company: Microsoft Corporation description: NT Kernel & System Bug check description: This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at DISPATCH_LEVEL or above. This is a software bug. This bug check belongs to the crash dump test that you have performed with WhoCrashed or other software. It means that a crash dump file was properly written out. The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time. On Sat 04-Jul-20 2:53:16 PM your computer crashed or a problem was reported crash dump file: C:\WINDOWS\Minidump\070420-58296-01.dmp This was probably caused by the following module: ucx01000.sys (0xFFFFF8003DAD5736) Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFFF8003DAD5736, 0x0, 0xFFFFFFFFFFFFFFFF) Error: KMODE_EXCEPTION_NOT_HANDLED file path: C:\WINDOWS\system32\drivers\ucx01000.sys product: Microsoft® Windows® Operating System company: Microsoft Corporation description: USB Controller Extension Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch. This might be a case of memory corruption. This may be because of a hardware issue such as faulty RAM, overheating (thermal issue) or because of a buggy driver. The crash took place in a Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time. The following dump files were found but could not be read. These files may be corrupted: C:\WINDOWS\Minidump\082720-54031-01.dmp
  8. Am a session musician and although I play lots of instruments I play bass most of the time, I have one of the new James Tyler variax guitars and I must say its a vast improvement and is one of my must have guitars I take it everywhere. I personally would love you to do a new version of the variax bass to have one in my arsenal would make my life a lot more easy, Would love to hear all of your thoughts on the idea and what it must have for example sounds and the desine of the bass ?
  9. In trying to use my HD500x as an audio interface, the audio level is EXTREMELY low... barely audible. Anyone else experiencing this or have a fix for it?
  10. Helix: https://shop.line6.com/marketplace/steve-vai.html POD Go: https://shop.line6.com/marketplace/steve-vai-pod-go.html HX Stomp: https://shop.line6.com/marketplace/steve-vai-hx-stomp.html I got my Steve Vai live tone done for Helix. It is live in Marketplace right now! I used the new Carvin Legacy Drive model (Legendary Drive in Helix) for this. It took me some time to crack the code to get it sounding just the way I wanted it. It has a very rich sound. The Wet/Dry/Wet signal routing is always something I have fun playing with but don't use a lot myself (since I mostly play mono venues). I've always been at least marginally happy with my dirty lead and rhythm tones but it's the cleans that have always disappointed me. I stoked to the max to have been able to nail these clean tones. Seriously, Helix "floors" me (har har) with the quality and flexibility of tones I am able to get. I had a blast making this and hope you'll all dig it. I am also working on versions of this for HX Stomp and POD Go. I'll update here when they are ready! Update 1: POD Go preset is now also here! The biggest challenge of making this tone was the fact POD Go does not have the Carvin Legacy Drive model. Being lucky enough to have Helix and POD Go side-by-side gave me the chance to audition and tweak until I could get an amp model that sounded convincing. Check the playlist of videos below and let me know what you think of my effort. POD Go is no joke. I did not feel the need to make any trade-offs bringing this awesome Vai tone. Update 2: The HX Stomp preset is live, too. Super happy about this little unit. The Stomp gives a little more wet/dry flexibility with its two paths and the Carvin Legacy Drive model. It also retains the ability to use two different cab or IR on each path which widens the stereo spread a bit. Either way, I think all three of these units are top notch and sound fantastic! Helix: https://shop.line6.com/marketplace/steve-vai.html POD Go: https://shop.line6.com/marketplace/steve-vai-pod-go.html HX Stomp: https://shop.line6.com/marketplace/steve-vai-hx-stomp.html
  11. Hi all... Thanks in advance for your help. I tried the search function here first but most of the filtering options seemed unavailable so the results list was way too long. I've revamped my old laptop and want to experiment with my POD Studio UX1/PodFarm and a DAW. Thought I'd try Cakewalk first but I have also installed Reaper because of this question I have - I don't know if I have a problem or if what I observe is to be expected. I used the SI-drums and SI-bass in Cakewalk (just the midi of the some of the included loop rhythms) for a couple of tracks. I set the loop playing and I can add VST Fx like reverb, etc. with all the Cakewalk-included plugins - I can manipulate the plugin controls, hear the effect, I see signal meters bouncing, etc. If, however, I select any of the PodFarm plugins, it's like they are permanently bypassed. I don't hear any change or see any input/output signal and turning knobs does nothing. (Fwiw, I could not find a "power on/bypass" button on the plugin itself but maybe I missed it. When I say plugin, I've tried the whole PodFarm2 giant plugin, with all the amps, etc. and then some individual effects as well - same behavior either way.) Perhaps this is expected? Are the Line6 plugins tied directly to the UX1 interfaces and can't be applied otherwise? Seems logical on one hand, why would they allow the plugin to be used outside the scope of their product after all? But this just goes against my (admittedly very!) limited knowledge of DAW/VST fundamentals. I could answer some of my curiosity by going to get a guitar or mic and plugging it in to the UX1 and actually trying it to see if the plugin is enabled. But that's taking the easy way out and I'm stubborn like that! :-) (While technically possible I suppose, it seems unlikely that "plugging in" to the UX1 is going to magically enable the plugin.) thanks! Rob Update: I did just now find all the little yellow on/off toggles for the various effects/amps/mics etc in the big PodFarm plugin. They are all "on" as they should be but the effect is clearly not enabled. Also, how might I find out if my license includes the use of the VST plugins? (I would have expected some sort of indication while trying to use them if in fact my license doesn't include the plugins.) Update: I think this text I found from the Pod Farm 2 install documentation suggests I should be able to use the plugins as long as the interface is connected: (meaning I don't necessarily have to be actually *using* it as input) "Just remember that for running POD Farm 2 & elements Plug-Ins, your Line 6 hardware that holds the POD Farm 2 license must always be connected via USB (even if you’re also using a 3rd-party interface). You don’t necessarily need to be using your Line 6 hardware as your active USB audio device - it just needs to be USB-connected (and powered on for units that have a power switch)." So now I think there is a real problem of sorts here. I'm going to use Pod Farm standalone and see if that works as expected before trying anything else.
  12. Hi, I was going to use my Pod HD500X through an active speaker for home use only. I have been looking at a JBL 305p mk II and was hoping that this would bring the unit to life, as I struggled to dial in a good tone and have just not used it for a while as a result. I have never been confident to use it live in case I couldn't get a usable sound during a short sound checks. I play heavier music, Metallica/Pantera, so I need a good clear high gain tone. So the questions I have are: - What is your experience of using the HD500X through an active monitor playing with high gain sounds at home? (I have read that this was not advised in the link below but had hoped this would be a gd space saving option https://www.axedr.com/pod-hd500x-complete-review) - Any tips to dialling in a good tone if you have had success? Also, to go off on a tangent, I have considered buying the pod go or helix stomp (with external footswitch/expression pedal) as a grab and go solution for gigs. Has anyone upgraded to pod HD500X to either? Thanks in advance for any replies.
  13. Hello to you all, I'm owner of a POD HD500X, i had it since Christmas 2014. Still in excellent physical hardware conditions, majorly home-use. I've notice something very peculiar throughout the years, and is that the display has loose some "contrast" from its original parameters. For better understanding I attached a video showing what I'm referring to. In essence, the default LED CONTRAST parameter in the setup page 2, which is 28, On my POD doesn't look that great. Nevertheless, when you set it on the 40-45 range looks really great. Obviously I didn't perform a Factory Reset and no luck. I know some of you are maybe thinking "if your display looks great by just adjusting the LED contrast, whats the big issue here?" My question: It's not normal for a display present this rare behavior ¿its my display slowly "dying"? ¿is it a progressive issue where possibly the LED set at 40-45, right now present goog quality in the future will look awful, as it did one with the default led constrast 28? I'm not interested in spending on a new console unless this one gets faulty like a future bad display. Thank you in advanced, PODDISPLAY.mp4
  14. I downloaded the software to my surface but it won't launch. I troubleshooted everything on my surface, all settings are correct, but still won't open the app. It says side by side configuation is incorrect. Curious thing is when I first installed the program, it worked.
  15. Hi everyone Here is the idea that I have: I have Korg ESX sampler and I want to control it via MIDI on POD 500. I want to assign one footswitch of the POD so that it would Start/Stop the playback of the ESX when I need it. The problem is that I can't figure out the POD MIDI settings for the Play button on the ESX. I was able to control some parameters on the ESX via POD 500, but couldn't find out which settings I need for Play (Start/Stop) button Can somebody please help me with this? Thanks in advance
  16. Hello people!, i need your help about this. I connect my piano into the input of the pod xt pro, and use some fx's of it and then i connect the headphones to hear it mixed, AND at the same time i want to connect the pure signal of my piano from the Unprocessed Guitar Out of the pod directly to a selfpowered monitor cab that i have, but there is no audio at all... what i'm doing wrong?. i thought that connected that way i could ear my piano just Dry without effects into the cab. Do i need something else between the unprocessed guitar out of the pod and the input of my selfpowered monitor cab?... I would appreciate any help about this since i want to hear the Dry signal from one Out and the Mix signal with all the effects thru the normal output of my pod or the headphones out like i use to do it. PS: I use normal 1/4 guitar mono cable to make all the connections from ins and outs Thank you!
  17. Hi Sorry if my english is not very good, I'm Indonesian I have a problem with line6 POD Studio GX The output from the line out/headphones is mono, i can't make it stereo. Pan pot doesnt change the output sound panning. Here are some things that i've done to fix the problem (but not work) Reinstall the software Change the headphone/line out jack till 6 times Updating to the latest driver/software/monkey etc Installing it on different computer Installing on different OS (Windows XP/Windows 7) Setting the line6 audio/midi setting None of the above is work. Usually i can fix some problem like this, I've been using many line6 product since 2003, and i'm working as line6 endorser for PT. Citra Intirama in Indonesia since 2005. So usually i can fix small problem like this. But this one is different, i thing i got a defective unit. Please help. Maybe i miss something. Thanks
  18. Q: Can I connect my POD/2.0/XT/X3/Live to the front (instrument input) of my amplifier? A: Yes.You will want to create as clean a sound as possible on your amplifier. You will want to make the combo amplifier's EQ as "flat" as possible by turning the treble and bass controls to zero and maxing out the mid control. You should also set POD's output to 9 or 10 o'clock to avoid overdriving the instrument input of the amplifier and have no effects active. You will want to experiment with the output level on the POD to create a sound that works for your situation. Below is the routing for this set up: Guitar > POD unit > Amplifier instrument input. This works but you will be stacking two preamps in series (the POD unit acts as a preamp). Make sure you also adjust the OUTPUT Mode on the POD unit for optimal tone, many end users prefer "Combo/Stack FRONT" Q: Can I bypass the preamp section of my amp to avoid stacking two preamps? A: Yes, There are two ways this can be accomplished. 1) If your amplifier has a CD/MP3 input you can go directly in the this jack from the POD output (This is a common method with the Line 6 Spider Series amplifiers). Be aware you may need to "trick" your amplifier input by using a 1/4" "dummy" plug in the instrument input to allow signal to pass to the speaker (headphone adaptors often work well for this purpose). Guitar > POD unit > Amplifier CD/MP3 input with 1/4" "dummy" plug in the instrument input 2) If your amplifier has an effects loop (i.e. the Line 6 Spider Valve or Flextone) you can use your POD unit as the main Pre amp and distortion generator, using only the power amp section of your amplifier by plugging into the "effects return" or "power amp input". If the amplifier has a "power amp in", the POD output will most likely control the output volume. If the amplifier has "effect loop return" the amplifier master volume will most likely control the output volume. Below is the routing for this: Guitar-> POD In - POD Out -> Amp FX Return. Make sure you also adjust the OUTPUT Mode on the POD unit for optimal tone Combo or Stack PWRAMP when applicable. Q: Can I run my POD/X3/xt/Pro/Live/Floor in an effect loop of an amplifier to use just the effects rather than the amp modeling? A: Yes, it is possible to to run a POD as an effect unit in the effect loop of an amplifier. You may want to turn off the amp modeling or use as clean a sound as possible to avoid stacking preamps. You may also need to lower the "line level" signal of the amplifier's effect send output to "instrument level" to avoid potential damage to the input of your POD. Some POD units will have a pad switch that will accomplish this function. If your POD unit does not have an input pad switch, a device such as the Ebtech Line Level Shifter can be used to lower the line level if necessary. Below is the routing for this: Guitar > Amp In / Amp FX Send> POD IN - POD Out > Amp FX Return. With this routing, you would have to bypass the amp modeling on the POD unit and use it for FX only, using your amp's own preamp section. Q: Can I connect my POD to two amps for a stereo configuration? A: Yes. Connect the left output of the Pod to the input of one amp and the right output of the Pod to another amp. It would be best if you could connect your Pod to the amps using the effects loop of the amp if you have one since it will bypass the preamp of your amplifier. Q: What is the Four cable method? (POD X3 Live and Pro Only) A: The "Four Cable" method (4CM) can be used for any effect unit that has an effects loop when connecting to an amplifier that has an effects loop (i.e. the POD X3 Live). This cabling method allows the end-user to place filters and overdrive units before the preamp section of the amplifier, and modulation and delay effects after the effect loop in the effect unit. This way the amplifier will provide the tones and the Line 6 device will provide the effects (pre and post). Be sure to enable the effects loop, and experiment with Pre-post effect to decide which method works best for you. Instrument > X3Live guitar in X3Live effect loop send > instrument input of amplifier Amplifier effect loop send > X3Live effect loop return X3 line output > Amplifier effect loop return. Q: Can I run the two tones separately, such as one tone for "pre" amp sounds and the other for "post" (i.e. effect loop) sounds? A: An "alternate" method of the Four Cable method is to completely separate the front of the amp effects (i.e. filters and overdrives) into Tone 1, and the time based effects (chorus, delay, reverb) in Tone 2. The tones will need to be panned hard left (1) and hard right (2) in the outputs section (any blending of the tones may result in feedback). Be aware that you will need to have both tones active to get sound, and you need to set up the inputs as follows: Tone 1: Guitar, Tone 2: Aux. Feel free to experiment with the "amp settings" to determine which setting works best for your setup.The connection wiring is: Instrument > X3Live guitar in X3Live Live (left) output > amplifier input Amplifier FX loop send > X3Live Aux input X3Live (right) output > Amplifier FX loop return Video is listed alphabetically under "Multi-Effects".
  19. Good afternoon, I'm a proud owner of a PODxt Live for many years; It worked like a charm until a few weeks ago. Starting from the beginning, a year ago I broke the USB connector; Almost a month ago I decided to finally fix the USB port, so I changed the connector to a new one (I'm experienced with electronics), when I turned on the POD to try out the new USB connector, the POD simply wouldn't start; It flashed all the LED's and maintained them on, a brick with lights basically. The USB works just fine, I can access to the POD via PC but the Flash Memory is just not accessible; I checked every internal part on the POD, all the values are normal and nothing seems to be "broken". Is it possible that anyone can get me the Flash Memory full dump file of a PODxt Live so I can reprogram mine? Sorry for my bad English, Best Regards.
  20. Sharing Settings! POD HD500 SLASH Tone MARSHALL Amp Simulation [PATCH - USB Recording]. POD HD500 STEVE VAI Tone DISTORTION "The Love of God" guitar sound [LINE 6] PATCH Settings in the video.
  21. Been searching for anyone who has used the FBV3 in daylight, and how they are using it so they can see the led display. Works great inside, or at night but use this thing is daylight, and forget about it. You cant see anything. Its worthless during daylight hours. Anyone have any solutions or suggestions to this issue? ANY suggestions are appreciated, as I cannot find anyone that has yet to mention how they are using it during daylight hours. Please help if you can. Thanks
  22. I have a problem with the POD HD 500X. I'm normally playing at home then I want to change from the EXP1 to EXP2 to use the Wah effect, but the POD shuts down and it begins to restart over and over again without starting. Waht could it possibly be? FX overuse? Wrong calibration?
  23. I bought a used POD X3 Live some time ago, but was never able to get any sound out of it. The outputs seemed completely dead—no hum, hiss, or anything. I just now reinstalled the latest firmware (not an update, just a reinstall) and I can finally get sound, but it still behaves very strangely. When I switch to patch A, B, C or D, the LED next to the pedal indicates Volume mode, but no sound comes out in any pedal position. If I manually click the pedal into Wah mode, sound comes out, but the pedal doesn't affect either the Wah or the Volume! I found some online discussion of problems with the pedal, but nothing definitive. Anybody know about this?
  24. Anyone tried to edit the sounds on their POD 2.0 using Windows 10? I've tried to download Sound Diver and Line 6 Edit but neither seem to be available for Windows 10 as far as I can find. Anyone come across this issue, or found a way to hack it? Cheers
  25. POD Farm 1.0 System Requirements Windows® Pentium 4 -1.2GHz or better (2.5 GHz or better, or multi-core CPU recommended) Windows® XP (with SP2 or SP3), Windows® XP X64, Windows® Vista® (including SP1), Windows® Vista X64 512 MB RAM minimum (1 GB or more recommended) 1 GB free hard disk space minimum (10 GB or more recommended for recording) Drive speed 5400 rpm minimum (7200 rpm or faster recommended) 1024 x 768 minimum screen display resolution CD-ROM drive One free USB 2.0 compatible port on computer (USB hubs are not supported for Line 6 devices) Internet connection for online features Compatible Line 6 USB hardware (device must be connected to computer & authorized to use POD Farm): POD Farm Plug-In - POD Studio, TonePort, GuitarPort, POD X3, or PODxt hardware POD Farm Standalone Operation - POD Studio, TonePort & GuitarPort hardware Mac® Intel or Power PC based G4 1.5 GHz or better (G4 1.67 or better, or multi-core CPU recommended) OS X 10.4 or later 512 MB RAM minimum (1 GB or more recommended) 1GB free hard disk space minimum (10GB or more recommended for recording) Drive speed 5400 rpm minimum (7200 rpm or faster recommended) 1024 x 768 minimum screen display resolution CD-ROM drive One free USB 2.0 compatible port on computer (USB hubs are not supported for Line 6 devices) Internet connection for online features Compatible Line 6 USB hardware (device must be connected to computer & authorized to use POD Farm): POD Farm Plug-In - POD Studio, TonePort, GuitarPort, POD X3, or PODxt hardware POD Farm Standalone Operation - POD Studio, TonePort & GuitarPort hardware
×
×
  • Create New...