aaronlyon Posted March 1, 2018 Share Posted March 1, 2018 I'm trying to set up a patch for guitar and voice using one DSP for each, then summed to a single path so I can follow with a looper and reverb, and output as a mono sum. I started with the Guitar + Vocals template, but I can't figure out how to merge the two paths. Quote Link to comment Share on other sites More sharing options...
pbatts Posted March 1, 2018 Share Posted March 1, 2018 You don't really need to merge them. Just add another reverb for the vocals and set the same output for both. Edit: whoops didn't see the looper on path A Quote Link to comment Share on other sites More sharing options...
aaronlyon Posted March 1, 2018 Author Share Posted March 1, 2018 Right, I'm trying to get the looper to loop both guitar and voice. But I ran out of DSP power when using Path 1 only, thus the problem. Quote Link to comment Share on other sites More sharing options...
pbatts Posted March 1, 2018 Share Posted March 1, 2018 You could do something like this with physical jumpers in Send and Return 1 and 2 if you need stereo or just use one Send and Return for mono. This would also allow you to adjust the balance between guitar and vocals. Quote Link to comment Share on other sites More sharing options...
BigJayBrian Posted March 2, 2018 Share Posted March 2, 2018 Path1 guitar as input > guitar effects > Send path 1 to 3rd line (sorry, can't remember the 2a/b names) On path 4, mic only as input > vocal effects > merge with path 3 Put the looper + reverb after the merge on 3Rd line Quote Link to comment Share on other sites More sharing options...
zexzem Posted October 23, 2020 Share Posted October 23, 2020 Did anyone manage to get a good solution for this? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.