Pod HD500x live monitoring

[Tuliololo]

Hi guys, i have some troubles with my setup.
I used to monitor my sound on liveshows via "phone" output. I made a preset with amp and cab emulation, sent it with XLR's to mixing console, so phone output gave me the same sound as the soundguy gets.
But recently i got an amp, so i tried to do more complicated thing: i made a patch with effects for amp and panned it Right and connected Pod with real amp with 1/4 jack from right output, and put amp and cab emulation on the Left, so i could hear left channel in left headphone. But something went wrong and i can hear both left and right channels in real amp and it ruins the whole idea. Maybe someone can tell me, what i done wrong?

[codamedia]

6 hours ago, hurghanico said:

solution: plug a dummy jack into the other unused 1/4" jack output, and you'll get again the separation of the 2 channels, and just 1 channel in each output

 

^^^^ THIS ^^^^

 

My setup is very similar and the dummy plug in the unused 1/4" output solves the problem. 

[stormstudios]

I can also confirm this works for what you want to do. Dummy adaptor plug for the win.

[Tuliololo]

On 5/18/2018 at 5:59 PM, hurghanico said:

when you plug just one jack cable to one of the two 1/4" jack outputs, both 2 channels L and R are mixed down into a mono signal (the XLRs are not affected), ie you loose the stereo separation, and the signals of both channels go through the same jack output..

 

solution: plug a dummy jack into the other unused 1/4" jack output, and you'll get again the separation of the 2 channels, and just 1 channel in each output

 

_____________________________________________________________________________________________________________________________________________________

All about POD HD500/X

new forum

Huge thanks man, this works perfect!