Leandro24 Posted November 3, 2013 Share Posted November 3, 2013 I had a POD X3 Live and I used this feature (from the manual): "Set up one sound on Tone 1, and a different sound on Tone 2, and switch between them instantly, with seamless transitions including delay and reverb trails. We like to refer to this as “Alternating†tones." How do you do the same in HD500X? Thanks! Quote Link to comment Share on other sites More sharing options...
TheRealZap Posted November 3, 2013 Share Posted November 3, 2013 you don't really... the x3 was a dual processor unit... albiet running lower resolution models through lower rated processors... that dual processor was what allowed that to happen. Quote Link to comment Share on other sites More sharing options...
edstar1960 Posted November 4, 2013 Share Posted November 4, 2013 Could you set up two amp models panned hard left and right? One on path A panned completely left, and one on path B panned completely right - and then set up the volume pedal to be a PAN control, up (minimum) being hard left, and then down (maximum) being hard right. Then you could move from one amp sound to the next just by stepping down on the volume pedal. I haven't tried it but can't see why it would not work. Hope that helps. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.