gchaddock1972 Posted November 4, 2013 Share Posted November 4, 2013 someone please down load this tone ( Another tone in the wall) and let me know how the amp parameters show up. It should be master 50% sag 100% hum 50% both bias 100%. http://line6.com/customtone/tone/243940/ 1 Quote Link to comment Share on other sites More sharing options...
Dutchguitarist Posted November 4, 2013 Share Posted November 4, 2013 OK, I checked this for you on my POD HD PRO. Except for the master all settings show up as you mentioned. The master however is at 1 o'clock (about 65%) Quote Link to comment Share on other sites More sharing options...
radatats Posted November 4, 2013 Share Posted November 4, 2013 I converted it to .h5s for POD HD 500 Edit and while it loads fine, all these deep settings are at 50%. Interesting... Quote Link to comment Share on other sites More sharing options...
gchaddock1972 Posted November 4, 2013 Author Share Posted November 4, 2013 I converted it to .h5s for POD HD 500 Edit and while it loads fine, all these deep settings are at 50%. Interesting... So change the settings to the original settings I determined. Did you notice a difference? I do and its huge. Sag at 0% makes the tone transfer instantly. At 100% there is a bit of...well....SAG. The tone seems to flex a bit. The Bias set to 100% makes the tubes sound more like 6L6's. At 0% more like EL34's. Bias X I can't place my finger on but it makes a dif as well. Cab Parameters are crucial as well. setting low to 0% will make the cab so beefy. res at 100% is a bit louder. Thump makes it do just that. I always set the decay at 0%. But if wanting a supper strat tone I will change it to 100%. Almost has a flange sound to it. Quote Link to comment Share on other sites More sharing options...
pratikb Posted November 5, 2013 Share Posted November 5, 2013 I opened the patch in HD Edit after change the extension to .h5e, and it showed all the Amp and Cab parameter at 12 o'clock. Pic attached cab parameters.bmp Amp parameter.bmp Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.