Pittbubulle Posted January 6, 2019 Share Posted January 6, 2019 Hi everyone, I've been using a Helix LT for almost one year. I also own a cab simulator (using IR's) that I plugged in the effects loop 1 of the Helix. As the Cabinet Simulator can receive Midi PC#, I connected it to Helix LT's "Midi Return". On dedicated patches on my Helix, I set a Midi PC# (Menu / Command Center / Instant 1 / Bank/Prog / Program#) which automatically called related IR on my CAB Simulator. Selecting any other patch had no influence on my IR's Loader. Until then, it was working very well. But, since I updated my Helix LT to Firmware version 2.71.0 - 9d66a1f, changing patch on my Helix (even in Factory 1/2, User 1/2/... or Template menu) automatically load a Midi PC# which value is memory number (i.e. : patch 01A is loading PC-01, 01B > PC-02, ... , 11B > PC-42) except for patches in which I set a specific Midi PC#. Is this normal?? Quote Link to comment Share on other sites More sharing options...
phil_m Posted January 6, 2019 Share Posted January 6, 2019 That’s normal, but there’s a global setting to disable it. Go to Global Settings>MIDI/Tempo and set PC Send to off. Quote Link to comment Share on other sites More sharing options...
rd2rk Posted January 6, 2019 Share Posted January 6, 2019 3 hours ago, Pittbubulle said: I connected it to Helix LT's "Midi Return" Connect it to MIDI SEND. Quote Link to comment Share on other sites More sharing options...
Pittbubulle Posted January 6, 2019 Author Share Posted January 6, 2019 Woooow!!! Thank you phil_m!!! It worked perfectly!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.