Andybassdoyle Posted January 26, 2019 Share Posted January 26, 2019 I'm a very new user but just starting to settle into using the LT. Most of the patches I'm building feature the two fx loops with me pedals in. I've noticed that even with the mix set to 100% the loops can sometimes sound very 'thin' when the pedals are bypassed. Bypass the loop itself and the sound is great. Problem is that when this problem occurs the pedals don't sound too great - I guess they are not getting a decent signal. What I find really odd is that some patches the loops are fine, some patches loop 1 is affected, some patches loop 2 is affected. The placement of the loops doesn't seem to have any bearing i.e. if I move them around there is no change. I've seen a few posts about phasing issues but nothing that really helps me. Has anyone else had this problem and if so how do you fix it? Quote Link to comment Share on other sites More sharing options...
zolko60 Posted January 27, 2019 Share Posted January 27, 2019 What is your troubleshooting procedure? Have you: Replaced your stomps chain with patch cord and compared? Compared two FX Loops with patch cord? Tried to set FX loops instrument and live levels? Tried to test separate stompboxes for their bypass behavior? Quote Link to comment Share on other sites More sharing options...
phil_m Posted January 27, 2019 Share Posted January 27, 2019 Do you have the loops in a parallel path, per chance? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.