Kukuruza Posted June 19, 2019 Share Posted June 19, 2019 Hey guys, I got a question: I want to use 2 different amps in PODs preset, thus I could switch from Amp to Amp within 1 Preset and get Clean or Distortion tone. So constantly only 1 of the Amps is on. And then this signal (Clean or Distorted) goes to Mooer. I've tried to split the path in the Preset but I can always hear the DI signal even when 1 path is switched off. So the DI is cutting through on top of the Distorted tone, so the DI signal is always on and it's pretty loud. I've tried to pan paths hard left and hard right but it doesn't help, it just mutes one of the Amps completely, so I can't use it anymore, or maybe I did it wrong, dunno. I've tried to use FX LOOP output and 1,4 outputs (which are more preferable for me). But it doesn't help. Seems that I'm missing something in the setup, but I can't identify it. Can you please help me with this? Thanks in advance Quote Link to comment Share on other sites More sharing options...
Kukuruza Posted June 20, 2019 Author Share Posted June 20, 2019 Oh, man Thanks a lot for this tip. I thought that the signal should automatically switch off when you switch off the Amp. I couldn't imagine that there is a separate volume control for the bypass mode that has to be turned down. Though it now seems obvious to me. Thanks a lot again. Will try to do it today Quote Link to comment Share on other sites More sharing options...
RonSom1976 Posted July 28, 2019 Share Posted July 28, 2019 Hmmmm, the answer seems to be deleted meanwhile. Could you please tell once again? I would be interested too ... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.