GuanoLoco Posted July 9, 2019 Share Posted July 9, 2019 I am sorry if this has been covered before. I created and saved a tone. When I was done all the factory presets were gone. How do I get those back. Also the expression pedal pedal is stuck on 2 and is not responding to input. This is really frustrating. Quote Link to comment Share on other sites More sharing options...
rd2rk Posted July 9, 2019 Share Posted July 9, 2019 Do a factory reset. 2 LED light Fun 3 & 4 Test Mode 5 & 6 Global reset 7 & 8 Reset setlists to factory, Keep IRs 8 & 9 Reset setlists to factory, Clear IRs 9 & 10 Reset setlists to factory, Global reset, Clear IRs 10 & 11 Upgrades existing presets to latest format 11 & 12 Clear current preset 5 & 12 Clear setlists, clear IRs, Return system settings to default 6 & 12 Safe boot mode Quote Link to comment Share on other sites More sharing options...
phil_m Posted July 9, 2019 Share Posted July 9, 2019 1 hour ago, GuanoLoco said: I am sorry if this has been covered before. I created and saved a tone. When I was done all the factory presets were gone. How do I get those back. Also the expression pedal pedal is stuck on 2 and is not responding to input. This is really frustrating. You may have unintentionally switched Setlists. Try pushing down on the Preset knob and then make sure you're in either FACTORY1 or FACTORY2. As far as the on-board expression pedal, you can toggle its function between EXP1 and EXP2 by pushing it forward and activating the toe switch. You may have to press with quite a bit of force as the switch tends to be a little stiff when new. Quote Link to comment Share on other sites More sharing options...
GuanoLoco Posted July 10, 2019 Author Share Posted July 10, 2019 Ok so I got it back to factory reset, if I have a tone I want to make does that mean I lose everything factory? Quote Link to comment Share on other sites More sharing options...
rd2rk Posted July 10, 2019 Share Posted July 10, 2019 First thing you need to do is....READ THE MANUAL! If you want to modify an existing tone, select it, copy it to a location in a different setlist and work on it there. Then you'll always have the original to go back to. Start a new tone from scratch by selecting NEW PRESET in that other setlist. Following those two basic rules should prevent you from doing whatever you did to cause your problem. Oh, yeah, did I mention....READ THE MANUAL! 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.