uelef 4 Posted July 18, 2019 Well, firmware 2.0 for Powercab 112+ will soon be published, and the Line 6 website reveals one important thing that will be new: We will have 12 speaker sims! Great news! (see here: https://line6.com/powercab/overview – at the end of the site there's a table where you can read about 12 speaker sims in firmware 2.0 …) Also new will be a third model of Powercabs: Powercab 212 Plus (with stereo mode!) I hope, Firmware 2.0 will soon be released! Quote Share this post Link to post Share on other sites
uelef 4 Posted July 18, 2019 Oh, 2.80 for Helix is out … Probably 2.0 for Powercab, too. Quote Share this post Link to post Share on other sites
Ron_Worley 0 Posted July 18, 2019 Question is how do you install the new firmware? Quote Share this post Link to post Share on other sites
phil_m 4,431 Posted July 19, 2019 2 hours ago, Ron_Worley said: Question is how do you install the new firmware? You have to use Line 6 Updater. Select it from the middle pulldown here: https://line6.com/software/index.html Once you do that, connect the Powercab to your computer, open Updater and just follow the prompts. Quote Share this post Link to post Share on other sites
uelef 4 Posted July 19, 2019 Yes, and it was a easier and faster process than updating my Helix floor to firmware 2.80. You should also update Powercab Edit. There are 6 new speaker simulations - I did not have the time yesterday to test them. But I will today. The best thing: You can select Powercab sims via Helix using a Line 6 Link cable (or any other XLR 110 Ohm cable which are much cheaper). Creating different presents in Helix with different PowerCab Plus simulations is no more a problem. Great! Quote Share this post Link to post Share on other sites
