AdmiralB Posted July 27, 2019 Share Posted July 27, 2019 I've owned a Helix rack for about six months, finally decided to pick up a Control. I opened the box, skimmed the manual (I was expecting to be able to just plug it in, but wanted to make sure), plugged in and powered on. All the scribble strips lit up solid white, and "Control needs to be updated" appeared on the Rack's screen. I pushed the 'green OK button' (knob six), and after a few seconds got a "Communication failed" message, which would endlessly loop if I kept hitting OK. I figured out how to power the Control on, into update mode (or at least, that's what the display said), but it didn't make any difference. My Helix was on 2.80, so I downgraded to 2.71 and tried again - no luck. I discovered that the Control's firmware is 1.06.05, so I thought that maybe being so old it would have to hit a 'waypoint' release - so I downgraded the Rack to 2.00. Still no change in behavior. I opened a ticket, but I suspect they're pretty overwhelmed with 2.80 stuff right now. I'm guessing there's no other way to force a Control update, than through the Rack? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.