Kb37 Question.

[RNRage]

Can you record separate simultaneous tracks from the KB37?

IE: Vocals via one of the XLR inputs,a synth via L/R line inputs, and an acoustic via guitar in.. And have it on 3 separate tracks.

[Triryche]

Not quite.

 

Any time you use the Line In's that is all you can use.

 

You can record mic and guitar at the same time to separate trax, then record the synth with the Line in's.

 

Or yo may be able to record mic and guitar simultaneously while recording the MIDI from the synth. depending on your synth and DAW.

[RNRage]

Not quite.

 

Any time you use the Line In's that is all you can use.

 

You can record mic and guitar at the same time to separate trax, then record the synth with the Line in's.

 

Or yo may be able to record mic and guitar simultaneously while recording the MIDI from the synth. depending on your synth and DAW.

 

Appreciate the quick response! Before I start a new thread.. Maybe I can get this answered here. If I'm running a 500x direct to my computer via usb.. Can I route it to POD Farm, then to the DAW (in my case, Logic Pro X, if it matters)? Or would I need to go L/R output from the 500x (into say, the KB37)?

[garrylindsay]

I set the Line 6 KB37 ASIO driver to do Mic/Instrument via

 

Send 1-2 Instrument

Send 3-4 Mic

 

I create a project with Cubase 7.5 and look at the drivers mappings and it always says Send 1-2 is inactive, so it auto picks the mic for guitar and vocal tracks, which I switch back to 1-2 for guitar and its dead ( obviously as its inactive )

 

So I can either get MIDO and guitar into Cubase ( if I change the KB37 driver sends ) at the same time or MIDI and Mic into Cubase at the same time, but never all 3

 

I thought I could do all 3 inputs at the same time into a DAW?