Retro-Rick 4 Posted October 16 I know it's a stupid sounding title, however, on one of the earlier firmware levels I was able to direct connect Midi in and out, and use button 12 to toggle snap shot 1/2. A lot of my presets have only 2 snapshots, and I don't use tap tempo at all, so it saved me from having to press buttons 1/7 and go into snapshot view, I'm usually in 8 presets view. With the current level of firmware, shorting the midi in & out causes a kind of feedback loop that freezes and locks up the Helix. Has anyone else messed around with this? I wish the helix had more footswitch programming options. Share this post Link to post Share on other sites
rd2rk 548 Posted October 16 Make sure that MIDI THRU is OFF. Might not solve the problem, but worth a try. 1 Share this post Link to post Share on other sites
Retro-Rick 4 Posted October 17 I figured out what was going wrong, I got it to work now. Button 12 is now programmable. Share this post Link to post Share on other sites
rd2rk 548 Posted October 17 1 hour ago, Retro-Rick said: I figured out what was going wrong, I got it to work now. Button 12 is now programmable. So, fill us in (help the next guy). What was wrong? Share this post Link to post Share on other sites
Retro-Rick 4 Posted October 17 The problem was that, when you re-save, you have to make sure you only do that on snapshot 1. Because the footswitch is set up that initial is snap 1, toggle is snap 2. Some times I would save it on snapshot 2 which creates a conflict and crashes the helix. 1 Share this post Link to post Share on other sites
rd2rk 548 Posted October 17 7 minutes ago, Retro-Rick said: The problem was that, when you re-save, you have to make sure you only do that on snapshot 1. Because the footswitch is set up that initial is snap 1, toggle is snap 2. Some times I would save it on snapshot 2 which creates a conflict and crashes the helix. Good to know. Thanks! Share this post Link to post Share on other sites
