delriofabio Posted March 3, 2020 Share Posted March 3, 2020 Hi What is the best set up to use a external multieffects zoom g5n , or separate pedal ? Thanks Quote Link to comment Share on other sites More sharing options...
phil_m Posted March 3, 2020 Share Posted March 3, 2020 Not sure I understand the question. The Spider V doesn't have an effects loop, so there's really only one way to connect the G5N to it. You have put it in front of the amp. Quote Link to comment Share on other sites More sharing options...
bobcoss Posted March 5, 2020 Share Posted March 5, 2020 Phil is correct. In general, you will plug the output of the g5n to the guitar in of the V240. Note you should make sure the output of the g5n is set to instrument level. Don't enable any amp or cabinet modeling on the g5n to just use the effects in the g5n. If you want to use the amp/cab modeling on the g5n, you could setup the V240 to have no amp. An alternative is to take the headphone ouptut of your g5n with a stereo cable to the AUX in on the back of the V240 in which case you are using it as a FRFR speaker (more or less). Bob Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.