jon_bondy Posted April 10, 2020 Share Posted April 10, 2020 I purchased a used Relay G10 Receiver, and the USB connector separated from the PCB fairly quickly. I re-wired it so that it can get power from a USB port (which I have on the power strip I use in my pedal board). If anyone has a Receiver that needs this repair, please get in touch. I can either walk you through it, or do it for you. Note that, while this solves the problem of how to power the Receiver, it does not fix the USB port, so you will not be able to install firmware updates any better than before the repair. Quote Link to comment Share on other sites More sharing options...
chasingMango Posted April 10, 2020 Share Posted April 10, 2020 A little hot glue was my solution! :) Quote Link to comment Share on other sites More sharing options...
jon_bondy Posted April 10, 2020 Author Share Posted April 10, 2020 I've seen that before. It will work if you get to it before the USB connector separates from the printed circuit board. Once the connector has separated, you will need another approach. I connect a USB cable directly to the PCB to supply power, but not data. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.