drbob1 Posted February 19, 2014 Share Posted February 19, 2014 My M5 started doing the "blue screen" where it never came on despite having the Line6 power supply. I actually dug out a power supply that put out 3 amps at the correct voltage just to double check that wasn't the problem. I removed a baseplate screw, scraped the case paint and replaced with a bare metal screw as suggested elsewhere-that solved the "on" problem. I can now reliably get the pedal to power on. It has, however, stopped passing audio in DSP mode (either bypass or effect on). In true bypass mode it will pass signal, so I've got to think the switch is OK. I've done a factory reset, and reloaded the firmware twice to no avail. Aside from disassembling it to see if there's a faulty ribbon cable, any other thoughts? Quote Link to comment Share on other sites More sharing options...
Jonbyehome Posted February 19, 2016 Share Posted February 19, 2016 I am also having this problem with my M5 and it sounds like its a common issue. Why doesn't line 6 offer a fix? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.