Dr_Morten Posted January 10, 2021 Share Posted January 10, 2021 Hi, In HX Stomp, I'm want to assign bypass for Shuffling Looper to Footswitch 1 (in Bypass assign). However, when I do that (and save), footswitch 1 doesn't light up and it doesn't react as if it has been assigned. I tried to also reset firmware (3.01) but still nothing. Also, immediately after resetting the HX Stomp, I can't choose FS 1-3 for bypass. Only FS4. Suggestions much appreciated! Thanks, Morten. Quote Link to comment Share on other sites More sharing options...
MusicLaw Posted January 10, 2021 Share Posted January 10, 2021 Not sure what might be causing what you are experiencing. Try connecting your HX Stomp to your computer to take a look at the settings in the current version of HX Edit. HX Edit also allows you to do an easy reset to factory settings should you need to do so to get back to square one. Quote Link to comment Share on other sites More sharing options...
Dr_Morten Posted January 11, 2021 Author Share Posted January 11, 2021 Thanks for the response! I think I solved it. Problem was that it wasn't possible to assign Bypass to, say, footswitch 1 if that was already taken by another effect. So I made sure that, say, footswitch 1 wasn't used by anything else and then it worked. However, on the HX Edit (on the computer) I could assign Bypass for several effects to the same footswitch. So maybe there is a difference in the setup between software in devise and on computer (or maybe I am just an idiot. Also a likely possibility...). Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.