paulgliddon89 Posted March 24, 2021 Share Posted March 24, 2021 Just wondering if anyone has connected a POD XT to a Flextone III and what the best way of connecting these up is please, thanks. Quote Link to comment Share on other sites More sharing options...
daveny5 Posted March 25, 2021 Share Posted March 25, 2021 Plug your guitar cord into the PODXTLive input jack (unless you have a Variax, in which you would plug that into the Variax jack). Then plug another guitar cord into the L/Mono output of the PODXT and the other end of that cord to the Input of the Flextone. The Flextone's Pilot Handbook has all the information you need to do this and more, like how to set the volume, etc. Quote Link to comment Share on other sites More sharing options...
paulgliddon89 Posted March 26, 2021 Author Share Posted March 26, 2021 Thanks Daveny5, is there a way I can only use the PODXT for the effects and turn of the flextone III effects use the floorboard to control the POD XT rather than the Flextone, I really want to just use the PODXT for modelling. Quote Link to comment Share on other sites More sharing options...
daveny5 Posted March 28, 2021 Share Posted March 28, 2021 Turn off all of the A B C D buttons so they are not lit and you will be in Manual mode so it functions only like an amp without any effects. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.