Duke_Skellington Posted July 9, 2021 Share Posted July 9, 2021 Hi all , hoping someone can tell me what im doing wrong. If i go to my bridge pup and strum, the little input icon thing in the signal chain goes red and you hear it clipping. It has t been doing this before. Ive tried different input impedance settings, dropping levels in everything even though its clipping when it hits the start of the signal chain, etc. I'm inly running a single coil size air norton in the e bridge, so not a particularly hot pup. Grr, thanks in advance. Quote Link to comment Share on other sites More sharing options...
phil_m Posted July 9, 2021 Share Posted July 9, 2021 Do you have the input pad turned on in the Global Settings menu? If you’re clipping the input, that’s really the only thing you can do besides dealing with the source (the guitar). If the signal from your pickups is really hot, and they’re not overly hot pickups, it probably means that you need to lower them a little. Quote Link to comment Share on other sites More sharing options...
rd2rk Posted July 9, 2021 Share Posted July 9, 2021 You didn't say which product you're using, but if it's the HX Stomp the equivalent of the Input Pad is called INPUT LEVEL. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.