When 3.15 Installed, My "Before 3.15 Footswitch Setup" Gone; How Reinstall?

[richardcuccia]

-- Help.

-- I installed 3.15 on my Helix LT.  After 3.15 was installed, my Footswitch Setup for my Presets disappeared. My "Before 3.15 Footswitch Setup" was: FS8-FS11 = Snapshots 1 through 4; FS2-FS5 = my choice of four different effect blocks.

-- I don't want to seem too uninformed, but how do I re-setup/replicate/reinstall my "Before 3.15 Footswitch Setup"?

-- Thanks, Richard

[silverhead]

It means you haven't completed the update. Restore the Backup file (it's in the update procedures), particularly the Global Settings in your case..

[richardcuccia]

Silverhead, Thanks. I did restore my backup file, I think. However, I will again restore my backup file, with special attention to the Global Settings. Here I go. Thanks again.

[HonestOpinion]

7 hours ago, richardcuccia said:

Silverhead, Thanks. I did restore my backup file, I think. However, I will again restore my backup file, with special attention to the Global Settings. Here I go. Thanks again.

 

If you have not already make sure you do a factory reset, per the update notes, before you restore your backup. To restore use HX Edit and under the File entry in the menu select 'Restore From Backup'.

 

If the backup restore doesn't restore your footswitch arrangement, you can do it manually by going to global settings --> Footswitches --> 'Preset Mode Switches' = "Stomp/Snap".