beardnoise Posted July 25, 2022 Share Posted July 25, 2022 i have a Helix LT and have built a lovely patch using all 4 lanes to provide modelling of two amps and two cabs its built similar to this: this is fantastic for my IEM feed for monitoring and FOH.... however i want to link to an amp for some stage volume. i noticed the pod GO has a dedicated line out (minus the cab sim) for just this purpose. is there anyway of splitting one more time to loose the cab sim? or would line6 be able to update the software to add this? any ideas? Quote Link to comment Share on other sites More sharing options...
beardnoise Posted July 25, 2022 Author Share Posted July 25, 2022 sorry meant to say PodGO has dedicated "AMP OUT" which automatically removes cab sim as far as i'm aware Quote Link to comment Share on other sites More sharing options...
codamedia Posted July 25, 2022 Share Posted July 25, 2022 Place a SEND directly before the CAB simulation. Set the SEND to "instrument level" and connect it to an amp. Anything after the send will not make it to the amp... so you might need to re-work the presets a little. Another option (what I do) is use a small FRFR on stage for some stage volume. This gets the exact same feed as the FOH/IEM/Monitors... I leave that connected to the BIG VOLUME so I can dial in whatever amount of FRFR (stage volume) I want without effecting the FOH or Monitors. 1 Quote Link to comment Share on other sites More sharing options...
beardnoise Posted July 26, 2022 Author Share Posted July 26, 2022 thanks thats great. i'm pretty new to helix so still working on all the little tricks etc. i assume the "send" block doesn't need a return as i assume you mean to use the send of one of the FX loops? Quote Link to comment Share on other sites More sharing options...
beardnoise Posted July 26, 2022 Author Share Posted July 26, 2022 this patch is for bass so i'm using the actual amp of the woody blue model straight into the power amp in on the actual amp. idea being i'm modelling the amp that i own! into its matching cab. i need to use the amp sim as my actual amp needs a service but the power amp section is fine! bit convoluted i know but i have high hopes for it! Quote Link to comment Share on other sites More sharing options...
brue58ski Posted July 26, 2022 Share Posted July 26, 2022 Correct that the SEND block needs no return if you don't need one Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.