doughadfield Posted November 17, 2023 Share Posted November 17, 2023 After waiting a VERY long time we finally have an update to Pod Go, which is extremely welcome! However, the one key feature I was really hoping for (and with all the hints around a re-written cab engine, we had good reason for hope) is still missing - no stereo cab block! This means that the Pod Go can't be used for stereo effects into the PA if you still want to hear those effects on-stage - the pre-cab tap point for on-stage monitor would be really useful, but all stereo capable effects have to be placed AFTER the cab block, so you can't hear them on stage!! - this is a huge limitation of the Pod Go and should have been fixed in 2.0, with the re-written cab engine - is there any hope at all that this feature will come soon in an update? Quote Link to comment Share on other sites More sharing options...
silverhead Posted November 17, 2023 Share Posted November 17, 2023 Most PA systems have multiple Monitor Send paths. Perhaps you could arrange for your own on stage PA monitor (not a guitar amp) to carry only your guitar signal from the PA? This would include your POD Go cab block as well as any stereo FX appearing after it. Disregard your POD Go Amp Out and use only the main Outs to the PA, requiring a stereo PA channel (or two mono channels) for your L and R outputs. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.