themetallikid Posted June 7 Share Posted June 7 So I tend to assign stomp like changes or auto-engage settings to my expression pedal for various effects. I tend to set my 'turn-on' setting at around 5-7%. However, while playing and I return my pedal to 0%, it will adjust, up a few % points to between 3-7% randomly. I'm assuming 2 things..... 1) the calibration isn't setting the 0% at the correct location (I dont believe this to be the issue as the 100% side of the range is spot on for sure). 2) that the rubber stopper maybe is too thick? would the best remedy be to maybe grind/shave that down a bit to get it to rest lower? Quote Link to comment Share on other sites More sharing options...
theElevators Posted June 7 Share Posted June 7 Is your pedal too loose? Or does the pedal not move itself, while it gets un-calibrated? My Helix LT used to do this where it sometimes would not go past 99%, then 98%. But rebooting it would fix the issue. Quote Link to comment Share on other sites More sharing options...
themetallikid Posted June 7 Author Share Posted June 7 No, its definately not loose enough to fall down if i leave it at 70%, but maybe a bit stiffer would keep it locked down where i step off. Yeah i had the same issue with the LT toe down side where i'd step off it at 100% and it would 'drift' down as far as 85%. so it made it stupidly tough to set the auto-engage thresholds. this isnt doing that, i can see the pedal return to 0, and then move due to the rubber stopper /foot. I used to do toe-down for the 'off' position and switched to heel-down...so I likely just didnt notice it right away (last 5ish years, lol) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.