cmscss Posted October 31 Share Posted October 31 Hi There, I run 2x HX Stomps, is it possible to assign a device name to them? 99% of the time it's easy because they use different presets but occasionally it's mildly confusing. Any help, much appreciated. Quote Link to comment Share on other sites More sharing options...
somebodyelse Posted October 31 Share Posted October 31 HX 1 and HX 2. Take a pot of white paint and paint a '1' on one of them and a '2' on the other. 1 Quote Link to comment Share on other sites More sharing options...
datacommando Posted October 31 Share Posted October 31 On 10/31/2024 at 5:58 AM, cmscss said: Hi There, I run 2x HX Stomps, is it possible to assign a device name to them? 99% of the time it's easy because they use different presets but occasionally it's mildly confusing. Any help, much appreciated. Hi, Currently, there doesn’t appear to be a way to differentiate between 2 of the same type of device, other than which HX Edit window is in the foreground, also indicated by a checkmark to the left of the active device name. Open HX Edit and click on the “Question Mark” icon in the lower left of the GUI. This gives you the option to launch the “HX Edit Application Pilot’s Guide” pdf. You can find the “Multi-Device, Multi-Window Support” information on page 3. If you feel naming each device is important and should be available within HX Edit then you need to post your idea on IdeaScale. There are no Line 6 staff here and only very occasionally do they visit these forums - (See the “sticky comment” in the black banner stripe at the top of this page entitled “Welcome to the Line 6 forums”). This link is where you need to go to have any hope of your suggestion been seen by anyone from Line 6: https://line6.ideascale.com/c/line6 Before posting any new ideas, please do a search to see if it's already been listed. Multiple requests for the same thing will thin out the votes. Also, post your ideas one at a time. Many users don’t vote for combined suggestions. Then you should use the “sticky thread” on the first page of this forum to let other users know what your suggestions are, with links to IdeaScale, so they can vote on it if they wish. Hope this helps/makes sense. Quote Link to comment Share on other sites More sharing options...
datacommando Posted October 31 Share Posted October 31 On 10/31/2024 at 8:49 AM, somebodyelse said: HX 1 and HX 2. Take a pot of white paint and paint a '1' on one of them and a '2' on the other. Using Gaffa tape and a Sharpie is a less permanent, or damaging, solution. ;-) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.