Control C/D Not Working

[mike-w]

Try this to see if your Stadium is working. My problem seems to be a hardware issue at this point - unless it can be fixed in a future firmware update. I wonder if others have the same issue.

 

I have two EXP1 pedals. To troubleshoot the problem, I went to an Empty preset and inserted a Simple Delay block. The Mix parameter was able to learn the EXP controllers in any combination of the two pedals and two cables.  On Control C/D, nothing.

 

I ordered a 1/4" 3-Male TRS to 2 Mono Y adapter.  Both Pedals work and are learned on A and B - Mix and Feedback, but nothing on C/D.

 

I did a firmware reinstall with Line 6 Central, and it didn’t fix the problem.

[silverhead]

I presume you have the Stadium XL? Control C/D do not apply to the non-XL Stadium devices.

[mike-w]

True

[jdomine]

Hello. C/D are set to ext amp by default, not EXP. You will need to go to Global Settings > Switches/Pedals > Page 3 and change C and/or D to EXP In.

[mike-w]

Thanks so much for your concise direction!

 

Now that I know what I'm looking for, I found it, kind of buried, in the online manual.  I must not have used the right AI queries when searching this issue out.

 

However, for those of us familiar with using two EXP1 pedals on a Helix Floor, this is how the HF interfaced with EXP pedals - two plugs, two cables, two pedals, learn controllers - done.  I'd recommend a change of default for C/D because others will be trying to apply the same, learned process to implement two EXP controllers.