PaulTBaker Posted Wednesday at 04:09 AM Share Posted Wednesday at 04:09 AM what is the optimum level for the right level meter on the focus view of the amp.... mine is probably at 80 to 90 %.... is that too much or just about right? Quote Link to comment Share on other sites More sharing options...
silverhead Posted Wednesday at 02:01 PM Share Posted Wednesday at 02:01 PM My levels are about the same. I wouldn’t worry about it unless you hear something you think isn’t right. I pay more attention to the signal level indicator in the Output block; if that turns red it means there’s clipping. Also, you can test the output level meter (the one on the right thwt you refer to) in the Amp block. If it behaves like a normal level meter it might change colour to orange and then red as you raise the amp’s Drive/Gain, Master, and/or Channel levels. I don’t know if it actually does change, but if you can make it change colour then you can be confident everything’s OK as long as it stays green. 1 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.