BenFM8407 Posted January 5 Share Posted January 5 Hi everyone, got my Stadium today and I’m running into a strange issue with it and I’m hoping someone here has an idea. Problem: Presets do not save correctly. Any blocks I add are lost after switching presets. What happens step by step: I create a new preset and add two blocks. I save it as a new preset. Immediately after saving, the preset is empty and the blocks are gone. I then add the same two blocks again. I save the preset. I switch to a different preset and then back. The blocks are gone again – the preset is empty. So basically, no matter how often I add blocks and save, the preset never retains them once I change presets. I used a Helix Floor before and I’m generally familiar with the workflow. I’ve attached a screen capture showing my exact workflow. At this point I feel like I’m missing something obvious, but I can’t figure out what. The Firmware is updated to 1.2.0. Any ideas or hints would be greatly appreciated. Thanks in advance! Ben Screen Recording 2026-01-05 at 22.05.01.mp4 Quote Link to comment Share on other sites More sharing options...
silverhead Posted January 6 Share Posted January 6 Are you naming the new preset when you save it? Quote Link to comment Share on other sites More sharing options...
GT40Graham Posted January 6 Share Posted January 6 I have this problem and I think that it's the app not connecting properly with wi-fi. I make the changes in the app and then also use the "save" button on the Stadium. Try that. Regards, Graham. Quote Link to comment Share on other sites More sharing options...
BenFM8407 Posted January 6 Author Share Posted January 6 Hello everyone, many thanks for your comments. I powered on the Stadium this morning and the issue is now gone. When I was testing yesterday, it was directly after the firmware 1.2.0 update had finished installing. I assume that an additional restart was required and missing, which caused the issue. Now everything is working as expected. :) Yesterday, it didn’t matter whether I gave the presets a custom name or just used the default “New Preset”. It also made no difference whether I saved the preset via the app or directly on the hardware. Thanks a lot! :) Ben 1 Quote Link to comment Share on other sites More sharing options...
dean701 Posted March 17 Share Posted March 17 just had this happen. Tried to import a preset and all the blocks were blank. Restarted the unit. was then able to import properly. Hours later I tried to save a preset and it wouldn't save. Reboot, was able to save. Not very happy with the amount of bugs still outstanding. Quote Link to comment Share on other sites More sharing options...
MojoAxe Posted March 19 Share Posted March 19 I have a corrupt preset on my Stadium which may be caused by the same bug. A couple of months ago I was creating a new preset that was based on an existing preset by using the “Save As” option. Stadium created the new preset under the name I gave it, however the new preset lost all of its blocks, there were just two blank paths. I deleted the newly created preset and I began to start the process over, however after deleting the preset from the USER area, it came back. I deleted it again, checked the list of presets to confirm that it was gone, but then it reappeared after 20-30 seconds. I did this several more times with the same result, so then I started investigating it. I found that I can add blocks to this preset, but when I try to save it, I get an error message,something to the effect of, “error, cannot be saved”. I opened up the windows app and tried to delete it from there and the results are the same. I even went as far as making a complete backup, a factory reset, then restore from the backup, and this “ghost” preset returned. i reported the issue to Support and I was requested to send them the preset. The tech said that the preset file had the header but was otherwise empty, so he requested that I send the entire system backup file. I haven’t heard back yet, but at least I know they’re aware of the issue so hopefully they can get it sorted out. In the meantime, since I’m unable to delete this preset from my unit, I moved it to slot 128D to get it out of the way. Quote Link to comment Share on other sites More sharing options...
sirhc Posted March 20 Share Posted March 20 I also have issues with the App - but more in the way, that it likes to disconnect quite often... Not sure if this is due to bugs or bad wifi. My wifi is not very strong in my rehersal room. For such cases, I still would prefer an old school usb connection ;) I stoped using the app - and wait for a next update. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.