rondesjardins Posted May 5 Share Posted May 5 New Stadium owner here (coming from HX Stomp). As such, this might be a user error. I'm having an issue whereby the automatic Snapshot Recall does not work for two switches where I assigned them to Snapshot 1 and Snapshot 2 using Command Center. This is in the "Stomp A" view and I customized two switches (Snapshot 1 and 2), where both switches go to each snapshot on press (as expected). However, if I reselect a switch it does not recall the former snapshot (and I have selected "Automatic" Recall in the Global Settings). There is also no secondary command assigned to each switch. If I switch into "Snapshot" layout it works fine. Is there a setting I'm missing in how I setup the switches in Command Center? Quote Link to comment Share on other sites More sharing options...
silverhead Posted May 5 Share Posted May 5 On 5/5/2026 at 11:19 AM, rondesjardins said: … However, if I reselect a switch it does not recall the former snapshot …. Unless I misunderstand, If you can tell this you must have made changes to the Snapshot settings before recalling it. Perhaps the Discard Edits parameter in the Snapshot Panel needs to be changed? Quote Link to comment Share on other sites More sharing options...
rondesjardins Posted May 5 Author Share Posted May 5 (edited) Sorry, I might not have explained it correctly. With the "Automatic" Snapshot recall...you should be able to click the same switch and have it jump back to the prior snapshot. Example: - switch 1 = snapshot 1 - switch 2 = snapshot 2 If the Stadium is set on snapshot 1, the user presses switch 2 to change it to snapshot 2. If desired, the User can then press switch 2 again and it recalls the prior snapshot (in this case, snapshot 1). This is not related to the "Discard Edits" setting. This works fine for me if I'm in a "Snapshots" view/switch configuration. However, I'm in "Stomp A" mode/view, and setup two snapshots switches using Command Center. In this case, it does not seem to work. Wondering if it's a bug, or if there's a setting I'm missing. Edited May 5 by rondesjardins typo Quote Link to comment Share on other sites More sharing options...
silverhead Posted May 5 Share Posted May 5 Aaah. OK. I think you’re confusing Snapshot Mode Return with Snapshot Reselect. Check Global Settings. Quote Link to comment Share on other sites More sharing options...
rondesjardins Posted May 5 Author Share Posted May 5 I have. It's not Snapshot Return Mode (I am not having an issue where pressing a button changes the footswitch mode). It is the Snapshot Reselect. It doesn't seem to work with Snapshot switches created/assigned in Command Center. Works fine if in Snapshot mode. Quote Link to comment Share on other sites More sharing options...
silverhead Posted May 6 Share Posted May 6 i'm not sure if that's intended behaviour or not. Open a support ticket to get clarification. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.