Loekito Posted April 28, 2014 Share Posted April 28, 2014 What's the meaning of that? We can "modify" our Variax directly using POD HD just like what we do in the workbench? Already upgrade the firmware on both POD HD500 (v2.31) and JTV-59 (v2.10), but didn't see any changes on the POD HD500 menu/screen. Quote Link to comment Share on other sites More sharing options...
TheRealZap Posted April 28, 2014 Share Posted April 28, 2014 you need to get the workbench HD program, monkey should show it available if you connect to the variax. before this update you had to use the separate variax interface rather than the pod. Quote Link to comment Share on other sites More sharing options...
phil_m Posted April 28, 2014 Share Posted April 28, 2014 What's the meaning of that? We can "modify" our Variax directly using POD HD just like what we do in the workbench? Already upgrade the firmware on both POD HD500 (v2.31) and JTV-59 (v2.10), but didn't see any changes on the POD HD500 menu/screen. It means you can access Workbench HD through and of the POD HD devices with a VDI interface. Before the only way to access WB HD was through the USB dongle. It doesn't affect anything in the HD500 itself. Quote Link to comment Share on other sites More sharing options...
Charlie_Watt Posted April 28, 2014 Share Posted April 28, 2014 With the Pod connected to your PC you can run Edit and Workbench at the same time which is a very nice thing! Much easier than messing with the knobs and looking at the display on the Pod. My ancient eyes are not capable of dealing with that display when the unit is on the floor and I am upright. Quote Link to comment Share on other sites More sharing options...
Loekito Posted April 28, 2014 Author Share Posted April 28, 2014 Thanks guys... @cruisinon2: Sorry I made phil_m post as "solved", since his post came first before your post. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.