moconnor Posted June 6, 2014 Share Posted June 6, 2014 I'm having a volume issue with my Spider II 75w combo. I can't get the volume to go below loud. I've had this amp for years, and I could usually use the master volume knob to level the sound at 'won't wake the neighbors' level. Within the last few weeks, however, I can no longer get it to go below about 8/10 -- on any preset or not. With the master turned all the way down, the channel volume all the way down, and no drive, the amp is still super loud. Moving any of these up does increase volume noticeably, but leaving them at 0 is still way loud! I've performed the factory reset, holding the 'A' button down for about 10 seconds while turning the amp on, but I'm still having the problem. Thanks in advance for any help or insight anyone can provide. Always grateful, Michael Quote Link to comment Share on other sites More sharing options...
jak_E_lee Posted June 8, 2014 Share Posted June 8, 2014 do you use the fbv shortboard? perhaps try the volume without the shortboard plugged in ,maybe its developed a fault and causing vol issues? Quote Link to comment Share on other sites More sharing options...
moconnor Posted June 10, 2014 Author Share Posted June 10, 2014 Not using a shortboard, and I should also note that I've eliminated any additional effects altogether. Cord from guitar straight to input on amp. Thanks, Michael Quote Link to comment Share on other sites More sharing options...
jak_E_lee Posted June 10, 2014 Share Posted June 10, 2014 sounds like a fault in the amp to me.Could need a repair done. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.