gmhague Posted June 15, 2014 Share Posted June 15, 2014 Hi everyone, I've gotten hold of a good condition Pod Pro and an (apparently) near-new Floor Board. The Wah pedal comes on, but I get no sweep. Various forums talk about calibrating the pedal, but the support links no longer work and there's no mention of this in the Pilot's Guide. Can anyone help? Can I calibrate it without some kind of software? Also, talking of which, visiting this forum has shown me for the first time the existence of Line 6 Edit. Where can I get hold of this and will it let me edit things on the Pod Pro? Thanks for any help. Graeme. Quote Link to comment Share on other sites More sharing options...
BillBee Posted June 24, 2014 Share Posted June 24, 2014 Hmmm the old 1st gen floorboard. I can't say that there was a calibration method. IIRC when you fire up L6Edit you can set the max and min values for the wah there. Been a long time since I fired up the old Pod Pro. http://line6.com/software/?submit=Show%3A&hardware=All&name=Line+6+Edit&os=All You are going to need a midi/usb cable to work with L6Edit. Pop the $$ for a MAudio Uno or at least an equivalent. If you get the cheap chinese one chances are you will return here asking why the Pod can't connect. -B Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.