arislaf

Well, comparing the jtv with the old variax...The old was much more better in many aspects except the tone of some guitars..

Yes, I adjust the string volume individual through the workbench to 60 % about...There is no buzzing when the guitar is unplugged.

I hope so..I am afraid maybe the graph teck that  change are mulfuctioning... :( but thakns for the help everybody.I will continue my research and try to fix it..I will come back on this if something changes.

Guys, really the most beautifull guitar was and is the vatiax 700...And the neck, and the body were simply perfect...

+` to the ozbadman.. I also wish i  could transfer the guts of my jtv to my 700...

ooops..not at all.... thanks man. again you save me!

I notice that the nut was misplaced...After I stick it up with some silicon glue, the buzz reduced very much but not at all..I adjust the neck as you suggest with no result.. I really don't know... :(

Hallo there. A strange thing happened today.while I connect my jtv via the device (hub) to check for update (newlly bought jtv), the line 6 monkey recognize my device and show that the guitar is fully updated. To the point now: the problem is that the hd workbench doesn't recognize the guitar...

I just got my JTV 69s today, with the HD version installed...The guitars in it are really awesome!Thanks Line6 !

Just a moment...If the JTV 69S is similar with the stratocaster, the 59 with the les paul, the 89 is with witch one? The pickups 89 are there but whitvh body to use? And the pickup of the 69 the humbucker witch one is the modeled one?

OMG... I am ordering a JTV today!!

I will try it out asap.Thank you!

I have the equipment that you discribe above (flextone 3 + HD500) And is an awesome combination!

Now about:

1. Best Seting is to use full model of the HD, with the 4cm, and connect the flextone to your computer (via midi) use the line 6 edit on flextone and set it to tuner.That way you will use the speakers of the amp as speakers without any simulation of power amp, same like a FRFR,

2. Not any downsides.

3. It is awesome aproach, worthy, and onether thing you can do is to use the 4cm, pre or full model on the HD, and a model on your flextone!You can discover some great new tones you never imagine!

P.s. Try the full amp plexi 45 from your pod with the ac15 of you flextone. You will  remember me ;)

On all strings, or just one particular string?

On all strings. Also, when i changed to graph tech, i already reduce the string volume through the workbench.

Hallo everybody, I hope for some help here...

I have a variax 700 blue trem, with the latest firmware,graphtech piezos, and elixir 10's strings.

Suddenly (after instaling the new strings) I notice that the acoustic models have a strange buzz, like a fret buzz.... am not sure what is going, and at the electric models doesn't appear this buzz.. Please help!

The Pod's not sh#t, your patch is (no offense). Post a screen shot of the settings if you want some help. Sounds like you've got everything way too jacked on drives and levels.

 

Here's an example of high gain without any fuzz. Don't mind the 127 drumming, I record clips so I don't forget them during my song writing process.

https://soundcloud.com/smithstudio/groove1-1

Awesome song!

Also check your setup!Remember to be Direct when you are recording.

I wish for more bass amps and vocal preamps, as well as a Roland Jazz chorus...(ok and an amp for acoustic)