mylesloud

you can use one of the eq's and just boost the eq volume.

It is definatley worth getting it fixed. Sound like you got it for free. Great unit!!!

If you have the delay set to Quarter note, Eight note, etc, then the delay time setting will change to what ever tap time you use on other effects. If you set your delay time to the numbers, like 33, 420, 545, etc, it should stay at your setting.

Try holding down the looper controls button until the screens light up white. Go to the 3rd. screen , under pres, True Bipass DPS / BVP , turn that knob to DPS/BVP.

I think I figured it out. just run your guitar cable into the first M13. FX return of 1st. M13 into FX send on 2nd. M13. FX send of 1st. M13 intoFront of the Amp / InPut OutPut of 1st. M13 into FX return on 2nd. M13. FX send and return from your Amp go to the 2nd. M13 Input and OutPut. Set the1st. M13 FX Loop Pre/Post setting to what ever you want going thru the FX Loop. set the2nd. M13 FX Loop Pre/Post to Pre All. This works for me so far.

I want to run my 2 M13's side by side on the floor. I want the first unit to send the first 3 preset chnls to the front of my amp and I want to send the 4th and all of the second M13 to my fx loop. I'm messing with it now, but if anyone has done this plz chime in on the cabling. Thanks, Myles

emmebbi, I use two m13's, but I run one in the fx loop of the amp with time based fx like delay, etc. , and the other one in front of the amp with compression, overdrives, etc.