ChaserHUN

Someone please help me out a bit :D

OK being a real noob hear, how do I set playback volume?? A képet a Képfeltöltés.hu tárolja. http://www.kepfeltoltes.hu On the left side at the channel you can set volume of the specific track, To the rigth from the marker, that sets the whole volume, which also makes a difference in the end volume of the mixdown. How can I make my recordings powerful? For example I listen to music on vol 50% in the player and 30% on the speakers and blows out the windows But with my recordings I listen it to 100-100 and it's still not powerfull enough.

Hey but the sound is not open and brigth enoug h if it's not pushed enough :S

My other problem is, how do oyu make your recording sound big and loud? When I'm satisfied with the loudness it also start to go in the red zone where it says it's too loud, and there aren't any other instruments yet

Okay, so I'm trying to make a good recording tone, but I just can't get rid of some high end fizz in the recordings, EQ makes it better, but doesn't dissappear fully. When we used a Profire 610 and Amplitube 3 all the fizziness were gone when cutting below 100hz and above 10khz. Here is a sample http://www.fileswap.com/dl/jCYLeS3f1q/ There is some nasty fizziness that I can't get rid of, and I don't know why, because I hear all these really clear recordings wit the POD HD and I wanna sound like that :D Here is the EQ I used on it:

Okay so I wanted to try out the POD HD 500X with Recabinet 3. I add a new audio track, and put in Recabinet 3 in the inserts but nothing happens, doesn't effect the sound at all. Someone pls help! Edit: This way only effects the suond when I play back the recorded sound, but when I'm recording it doesn't take any effect Audio/Plugins are all greyed out but donno why :S

Didn't assign the min/max values, that vas the problem :)

Isn't this how should I do it? This just turns the Delay on and off with the footswitch, but doesn't do anything else

Did that and nothing :S

Tried it in the HD Edit, but nothing, can someone post me a a screenshot?

Ok, I don't know why, I tried a lot of things, I want to use the expression pedal to maniplate the delays feedback or time, but I don't know how to do it. It just doesn't do anything at all. Someone please show me :S

I know how to use a noise gate, but the bomber uber sounds pretty thin and fizzy, the other amp models sound awesome, tired it today through a PA System, it was pretty awesome :P I'm not really satisfied with the sound trough headphones

I have the same sound if I leave the output mode on live or I don't use cab sims You should hear noticable difference, when I left it ot live when connecting on USB sounded the same like yours, switched to studio/direct problem solved. http://www.filedropper.com/podtest7 This is how it should sound.....not a perfect tone, but you get the idea

I've been paying around a bit more, seems if I use only the pre-amps into the VK than the sound is more balanced and I don't have to use cab sims. But the bomber uber still sounds fizzy, all the other amps sound good, is this faulty, or just the bomber uber is like this? On headphones doesn't seem to be that much fizzier than on a real cab. Dou you have the same with the bomber uber?

Was messing around a bit http://www.filedropper.com/podtest7 Cut everything under 100hz in cubase and everything above 6,3k What dou you think?

http://www.filedropper.com/showdownload.php/podtest4 I've recroded this with a bomber uber wit XXL-30 cab sm57 off axis on the left and Angel F-ball on the rigth same cab sm57 on axis http://www.filedropper.com/showdownload.php/podtest5 This is made the same just dual amps were in one patch and this was panned left and right I want my sound to be more open, and I don't know if you hear it, but there are some nasty frequencies in there that make the sound less clean Please give me some advice how can I improve this, I think it sucks a bit

So you can't assign individual patches to choose them for all 8 just for 4 th ABCD-s? This sucks a bit :( Also I found somewhere on the forum that the POD HD500x needs 150-600 ohm headphones, it's "funny", I have to spend more on headphones than on the HD?

Can you assign to all footswitches? I tried to assign to rythm to FS-8 clean to FS-7 and put everything on these on switches, but they just acted as on-off switches, couldn't switch between the patches

http://data.hu/get/7384594/podtest.wav Recorded this, Bomber Uber with XXL-V30 cab sm57 off axis, sounds duller and darker than on the VK/Cab Also on the VK it doesn't seem to be so thick like when recording Another question: How can I assign a full patch to one foot switch, lets say I want my rythm to FS1 and clean to FS2? Doesn't seem to figure tis one out

Been playing aound, seems the best is combo power amp, and the cab sims has to be turned ON, the fizzyness is mostly gone. This is when I run it through valvekings poweramp. For recording, I will upload a bit I just recorded Also in the earphones it sounds crappy, if the headphones are connected to the POD, I've read that it needs at least 150ohm? Mine is 32....

Someone please?

Okay my HD 500X arrived today. Tried it through a Valvekings poweramp section. I don't know why but I have a nasty high ice picky fizzy sound to it, which the valveking doesn't have at all when playing it by itself, I set the output to combo poweramp, the stack pwoeramp seems more fizzier, Also didn't seem to get a really good recording tone out of it on the computer I hear people getting these awesome tones, but even if I download their patches doesn't sound that good.

Thanks, great! One more question, do I need a stere jack on the end of the POD? Or a single mono jack-jack is good?

Is that the S/PDIF you are referring to? Because I'm looking at the I/O-s and don't see it Do I need some kind of special cable for this?

Noob question here, I wanna buy a HD500X and a magnum 44 to power my 212 cab, but the HD500X left and right outputs, how do you connect it to the EHX magnum 44? Because that only has 1 input