buzzalad

I updated my firmware to 2.50.2. Now every time I try and save a tone to preset position 1 and switch off, the amplify powers back up and says I need to update firmware. I can change and save the other 3 presets ok but not number 1. Any ideas please? AndyB

Thank you - all makes sense now

Yes Silverhead, that sounds reasonable - never thought of that. I presume then that I need to tell Helix to go to a Standard tuning but not "Don't Force" cheers

Hi chaps Is anyone experiencing problems with the Helex in respect to the Variax custom tuning. The Helix seems to be OK going from a "Don't Force" normal tuning preset to a custom tuning preset but won't change the tuning when going from a custom tuning preset to a "Don't Force" preset. I have to physically switch the Variax tuning back & forth to get rid of the custom tuning. Is this normal behaviour? any ideas?

Sorry Iknowathingortwo, I don't understand eq very much. Do I use the simple eq block? and what would I set that at? The low cut parameter goes from 0 to 1000 Hz and the high cut from 1 to 20 kHz

I'm taking delivery of a ALTO212 powered speaker later today and I was wondering if any of you knowledgeable gentlemen could give me any basic tips to get the best out of it. Currently going Variax - Helix - Roland Blues Cube Artist. Any help greatly appreciated

Can anyone recommend a preset to play Creep by Radiohead please? I want to try and play both parts so need a nice clean setting and then into a very dirty one. I thought I was on to it with a dual amp/IR setup but I kept running out of DSP any help would be greatly appreciated

Thanks for the replies. Not the end of the world. Have to wait & see if Line 6 take this up

Apologies if this has already been covered but does anyone know how to reverse the operation of a footswitch? I have assigned a footswitch to change channels on my amp and it is working but it's the wrong way round. I want the light to be off when I'm clean and on when I select crunch. thanks

Please could anyone tell me if I can use my Amplifi 75 as a monitor and if I can, how would I connect to Helix? 1/4" Jack or Aux? Many thanks

PeterHamm Wow, great advice thank you. Some very useful tips. Will that work with DarrellM5's 4 cable method? If so, I could incorporate your tips into that? Thank you

Thanks to everyone for your advice. Spikey, I would love to hear how you get on with the Firehawk 1500 + Helix. DarellM5, what extra does the 4CM give you? Thanks again

Hi chaps, I got my Helix yesterday and it's fantastic! I've played around with most of the presets and now it's time to start making a few of my own. I still consider myself a novice even though I've been playing for a few years and I don't really understand EQ and all that sort of stuff. I only play along to my favourite songs at home but I HAVE to sound like the original, sad but true! I was wondering if I could ask you knowledgeable gentlemen what you would consider the absolute essentials when starting to build a patch. I was thinking I could create a template of my own and then use that for all my patches. Most of the songs I play are quite similar anyway, mainly late 70s early 80s punk sounds. Appreciate any advice you can offer. I love this forum and think I am going to get endless hours of enjoyment from my Helix. I am running a variax into the helix and then out to the effects return of my Roland Blues Cube Artist. It sounds great with most of the patches I've tried and I haven't tried the four cable method - does anyone think that may be a better option? many thanks

Hi mate, I know you posted a while ago but the Line 6 power kit's still don't appear to be available. Which of those bits do I need if I just want to power my Variax? I am selling my DT25 and PodHD500X but keeping the Variax. Might I have all the cables I need? I don't want to rely on the battery because I always forget to charge it up. thanks AndyB

POD 500X edit has suddenly developed a problem. Every time I open the software and then try and change the Tyler Variax tuning setting, the software freezes up and I have to use task manager to close it. I recently upgraded to Windows 10 and was wondering if this could be causing the problem. Is anyone else experiencing problems with Windows 10. thanks