mziach

Do not disable this function, it helps to better protect the system from viruses that could reach the kernel such as ransomware that has already taken privileges on your system. I asked the Microsoft cell that manages this point, and for them it's Line 6 to correct the drivers so that it is compatible with this new Windows function to strengthen the system.

A good thing "Sync Midi Clock"! but there is a problem. I have tried with Pro Tools 12.7 et Sutudio One 3.3.4 and there is an offset with the clock. Helix always shifts the clock, for example: Pro Tools : 135 -> Helix : 137 Pro Tools : 120 -> Helix : 121 S1 : 90 -> Helix : 91 S1 : 98 -> Helix : 100 could you correct ?

it is not very stable, I reinstalled the 1.12 firmware and now the 2B path works. Grrrrrr!!!!!

Thanks, but this feature does not works with firmware 1.12.

since version 1.12 when I create the new patch, you can not route to the 2B path. You too?

since version 1.12 when I create the new patch, you can not route to the 2B path.

I tried! usb cable, other windows systems, other laptops! each time you start the Helix I get the message "USB not recognized" just when cold!

hello, I have a USB error on Windows(7, 8, 8.1 and 10) when I boot my helix and it is cold. If I boot and it's hot I do not have this problem. I tried everything and nothing works: 1. uninstall the driver 2. Helix factory reset 3..... do you have an idea?

Hello, A suggestion for Line 6. Do you add us to the global settings the ability to control the output volume (multi), because in the DAW recording volume is too low and I have to increase each patch (output -> level).

Amp/Cab : 1/ Real JCM 800 (1990) 2/ 4x12 Cab Brit V30 3/ 2003 Brit Gain J-2000 4/ Citrus D-30 5/ 2002 Mississipi Criminal (5150) FX : 1/ Stereo Square Chorus 2/ Sine Chorus 3/ Killer Z POD HD500X : 1/ keeps the initial position of Knob 2/ Can define the action of the volume pedal (for exemple amp drive + Volume like 1A preset) 3/ Usb detection Fix 4/ Input volume configuration, like Amplifi (I will wish controlling the impedance of the guitar eg -10 db <-0 -> + 10db.) 5/ if I do not use the Looper, to define an effect on the push button 6/ Correct hum to some amp that makes up too much in the bass and removes the clarity, such as Marshall simulations 7/ switch from one amp to another by pressing a switch (Off-> Amp A, On -> Amp B ) POD HD500X EDIT: 1/ All POD HD500X parameters 2/ Mic positioning 3/ Live Refresh Preset 4/ Windows 8 resize screen and/or full screen 5/ View all % parameters (Cab & Amp parameters) and some FX parameters (like Amplifi ;-)) 6/ Fix the bug when the Wha was inserted and not save to POD HD500X 7/ Name or rename the patch, it's hard to find the exact position to be able to do 8/ Able to change the position of the effects from the list 9/ when you change the settings of controllers, if you touch the volume pedal setting disappears 10/ To put a delay between the two channels amp (ms) 11/ working with clear patch (submit a default configuration, exemple New Tone) 12/ Possibility of forgetting a change. Today we are obliged to quit HD EDIT to forget the changes or turn off HD500X (undo changes) 13/ Sort amps by type like Amplifi 14/ In the selection of amps, preamps differentiate amps (two picklists) 15/ In the list of amps, start from the beginning, because the default is always on the preamp

Yes like Boss products.. ;)

Hello ZBF, #2 is possible. don't have pod here, you can check the manual. It is in there. Yes but... I want to like the patch 01A "Son Of Plexi" and I do not see how they did, and when I made ​​this adjustment by the editor it does not work like that, so it must be a tip. #3 could be some issue with your computer Not my computer, if I restart HD500X working properly. ^_^

hello, 1. What do you mean by "keeps the initial position of the knob"? When You move the knob for exemple from the HD500X and the position is 0 and the patch 50, the knob starts its value to 0 while I wish it starts at 50. 2. You can already assign the expression pedal to control the amp drive parameter. You have the original 1A patch, the volume pedal controls volume and drive, but I've never understood how to do it? I tell myself that it did not exist or bug 3. Are you have a specific issue with USB not working correctly? from time to time Line 6 Monkey can not find the USB port so I can not use Line Edit. I have to restart my PC to the drivers back. I have a PC running Windows 8.1. 4. Again, I don't understand what you mean by this. In the InputZ configuration, it is possible to choose (1M, Auto .....) I will wish controlling the impedance of the guitar eg -10 db <-0 -> + 10db, because each guitar has a different level of output and / or to give boost to the other. Regards Marc

Hello, You see if a firmware V2 come out? For me: Amp/Cab : 1/ Real JCM 800 (1990) 2/ 4x12 Cab Brit V30 3/ 2003 Brit Gain J-2000 4/ Citrus D-30 5/ 2002 Mississipi Criminal FX : 1/ Stereo Square Chorus 2/ Sine Chorus 3/ Killer Z POD HD500X : 1/ keeps the initial position of Knob 2/ Can define the action of the volume pedal (for exemple amp drive + Volume like 1A preset) 3/ Usb detection Fix 4/ Input volume configuration, like Amplifi (I will wish controlling the impedance of the guitar eg -10 db <-0 -> + 10db.) 5/ if I do not use the Looper, to define an effect on the push button 6/ Correct hum to some amp that makes up too much in the bass and removes the clarity, such as Marshall simulations 7/ switch from one amp to another by pressing a switch (Off-> Amp A, On -> Amp B ) POD HD500X EDIT: 1/ All POD HD500X parameters 2/ Mic positioning 3/ Live Refresh Preset 4/ Windows 8 resize screen and/or full screen 5/ View all % parameters (Cab & Amp parameters) and some FX parameters (like Amplifi ;-)) 6/ Fix the bug when the Wha was inserted and not save to POD HD500X 7/ Name or rename the patch, it's hard to find the exact position to be able to do 8/ Able to change the position of the effects from the list 9/ when you change the settings of controllers, if you touch the volume pedal setting disappears 10/ To put a delay between the two channels amp (ms) 11/ working with clear patch (submit a default configuration, exemple New Tone) 12/ Possibility of forgetting a change. Today we are obliged to quit HD EDIT to forget the changes or turn off HD500X (undo changes) 13/ Sort amps by type like Amplifi 14/ In the selection of amps, preamps differentiate amps (two picklists) 15/ In the list of amps, start from the beginning, because the default is always on the preamp Driver : 1/ Able to make on/off audio driver, for those who have already activated a driver (ASIO) And You ?