rhandy

Combo power amp works. But the best way to start is choose one blank preset, start only one amp, test different cabs, adjust settings on amp. Some amps have very low output to my power amp, compared to Marshall JMP1 preamp. I have to opern master gain and increase some Dbs on mixer.

HI! I don´t try in Studio Direct. I will try today! Thank You!

Hello I have one "old" setup Marshall JMP1 Pre Amp and Marshall 8008 Power Amp + Marshall 1922 Cab (2x celestion GT-T75). I connect outputs from Pod to Marshall Power Amp. I use output Combo Power Amp setting, but all presets sound muddy and too digital. If I use 4 cable method and use JMP1 as Pre-amp and pod only for effects on Fx Loop, sound good. I have to remove cab simulation and amp and use only pre-amps simulators?

I just can use pod hd500x on fxloop for color effects, nothing in front of amp. Fx Send is to noise when I have Lead Gain channel on my tube amp. 3 cable method, only.

Radatats I try patch but I can use it, always have lo output or feedback. Try down chanel A and UP chanel B. But doesnt work good

THANKS!!! IT WORKS

I consider put one DI-BOX between pod fx-send and amp? Just a question, I dont know if is a good idea or if anyone try. I dont know if eliminate noise and if works good.

I have one pod HD500x and I have one BIG Headache! First of all, I read and read and read and read again. I have one ENGL Blackmore signature head. Using 4 cable Method = Hum noise. GUITAR -> POD-> |POD FX SEND-> ENGL INPUT -> | ENGL FX SEND -> POD FX RETURN | POD 1/4" LEFT OUTPUT -> ENGL FX RETURN Using 3 cables = no noise. GUITAR -> ENGL INPUT -> | ENGL FX SEND -> POD FX RETURN | POD 1/4" LEFT OUTPUT -> ENGL FX RETURN _________________________________________________________ SO, NOISE COMES FROM POD FX SEND. To have same signal strenght (as the guitar pluged direct to amp) I have to mute channel B in Mixer and Center Channel A with more 5db. ___________________________ I use noise gates, hard gates, but nothing stop hum noise comes out from fx send. I dont use any amp simulation, no cab, and I try with new blank pacth only with noise gate in front of chain, mixer +5db, FXloop, nothing more.

But Is not possible rename list?

I make a mistake I set to update without preserve my setlist. Now I have Variax set list instead of have USER1, USER2, USER3. Its possible rename variax set list and delete all presets?

Duncann You are saying, one change one preset to other, if I have midi switch configured they send automatic that value out? Like I have PRESET 2A with FS7 to midi channel one with program change 003, and PRESET 2B FS7 to midi channel one with program change 005. When I change PRESET , automatic change value out?

Hello I have one midi / footswitch controller http://www.nuxefx.com/product_detail.php?id=79 I can send midi program changes and controller receive. I don´t know if is possible one footswitch send 2 diferent midi like on/off. When I use midi the led of FS doesnt on or off. For example I use FS7 to send one program to my footswitcher and is ON footswitch 1, but when I want turn it off, I need use FS8 for send other diferent message. Is like I have to have 2 FS on POD one for ON and other for OFF. I can´t use only one FS to assign 2 alternate midi messages???? Thanks.

I have terrible sound on headphones, can you tell me how to fix ???

I don´t know if works for you, but try to make factory reset! connect power and press four arrows, should appear one message, "Flash update", Open Monkey, and try instal! It works for me!

Hello! Where I can find Global EQ in POD HD 500x EDIT SOFTWARE V2.25?

Yes, is truth, sometimes have to deviate +or- 3db. I se Db meter more for orientation.

TheRealZap Thanks for your help! Now I use my phone with db meter app to control all patches at same level.

Master on the mixer? Channel on Amp? Is that?

I´m trying to have same volume level between diferent patches. When I change clean patches to dirty patches I have much more louder volume on dirty. I try to fix it with the mixer, by lower output on dirty pacthes. I just want to know if is the better way to do it or not?

I just put one print screen. Look at that.

I´m not confused. And information about release date is an answer to one my support ticket. I just put it here for share with all members. Thanks

Ok! Maybe I have wrong information from the store.

Ok! I just think I buy it wrong day. Is one very good pedalboard but when I buy it I think it can be upgrade it for V2.6 with all new amps for free.

In my case the store is the official distributor on my country, Line 6 have to upgrade the all stock of "OLD" HD500x , because if they dont do it, distributor can give all product back, because I dont beleive anyone wants to buy one OLD product for the same price as one new.

Last new Update about release date!!! Hi, The new firmware 2.6 will be available in mid April. It is not out yet. The firmware will be free, but if you want more aviable amps, that will cost money. The free firmware update will fix some security bugs, and add a global EQ setting. I hope this helps you out. Regards, Will - Line 6 Support Is an answer to be because I buy my POD HD500x in 15 of this month !