airguitargb

anyone know in UK where to get this cable from please that connects sonic port to ipad? the one i have has worn out! its has the new ipad air connection one end and what looks like a smaller USB connection at the other end into sonic port, photos attached thanks

What about a uk seller?

Does anyone know where in UK I can buy a replacement sonic port cable please? Thanks

Hi Trying to help a friend here I use an Hd500 and connect to a Marshall JVM using 4CM. I can choose if I want to here the Marshall pre amp with POD effects or remove the Marshall pre amp and use POD preamps easily and we all know that works. He is a bassist and has the Bass HD Pro rack unit and is looking to connect in same way so he can use his bass amp preamp and add effects. He doesn't think this is possible but I think it shouldn't be as I assume that in he main the connections and routing options would be same for guitar or bass. Any ideas please gents? Thanks

Thanks guys, that's basically what I thought so i I will stay as I am. Thanks for advice

Been offered a 500x as part of a trade on guitar. I have had a 500 for 4 years and all set up well with my Marshall JVM. I use it for channel switching and effects. I also use some modelling. My question is does the X offer that much more to make it worth changing as I understand I can't simply migrate my tones over from old to new. I know the X has more memory and some pretty lights around the foots witches but can anyone think of a reason to need to change as I don't use anywhere near the memory capacity of what I have really. Thanks

Simple question does anyone know please?

Anyone know the difference between fbv shortboard MK 1 and 2 ?

Hi Looking for a bit of advice or some tips on my query please. I use and HD500 connected via 4CM to a Marshall JVM 215c combo. The majority of my gig requirements are for electric guitar and this works fine for me. I then DI from amp to desk For several acoustic songs I plug direct into the Aux input on the HD500 and use some delay and chorus. The positive of this set up is its easy and only requires one channel on the desk. The negative is that I here the acoustic via the Marshall amp behind me which sounds crap as you would expect. I am trying to work out a way I could still use the effects of the HD for acoustic but cut out the sound from Marshall and use monitor only for acoustic. Any ideas welcome Thanks

Nice

I have a hd500 into power engine and great for electric guitar for gigs or theatre work, no good for acoustics though

Thanks Nick I have kind of already gone down same route with that download on previous amp /HD combos, was kind of looking more for people with JVM /HD experience and actual tried and tested level settings thanks

Hi Before I start the quest to try and find the right settings to connect my HD500 and JVM215c I wondered if anyone out there already uses this set up. Having previously never been totally happy with DSL50 and HD500 sound together I am going to try again. I use the 4 cable method so I can make use of the amps tone and use the pods effects. I am totally familiar with the basic set up so am not asking for what cable goes in which input etc and have previously downloaded a good set up guide by someone from this forum, so it's more actual practical settings with the two pieces of hardware I am after, ie levels on amp/mix, the 4db or 10db option and then on the HD effect loop levels of send/return/mix Thanks

Can someone tell me if they think it's fair that sonic port VX is brought out 3 weeks after I get a sonic port. If I had known I would have waited and spend the extra money on a VX. This is bloody annoying

Hi all It occurs all the time basically. Any rehearsal or gig location With atleast 3 guitars I have tried Changed all leads I have tried to eliminate obvious issues like loose connections in a guitar, crap leads etc

Sorted it now thanks

Bit cheesed off unless I can sort this, can I run sonic port and mobile POD in iPad with spotify so I can jam to music? I can with amplitude and spotify, just connected it all up and then can't gp hear music? Any ideas please Thanks

Any ideas?

Hi all I have battled with my HD 500 for a few years, I have posted on here previously, watched you tube videos trying to set up etc and still have issues with a Hum I can't get shot of whatever I try. I have tried 4 cable method with a. Marshall DSL50, Tech 21 Trademark 10 watt amp and now use a Blackstar HD 60 stage. Also gone direct into a Thomann T box pro active monitor. I get a hum whatever setting I use even with NO amp on the HD500 and no effects ie guitar into HD500 and out into monitor. I have played with the inputs, outputs, ground lift, pad, line,stomp settings and no change. I have changed cables and it happens in all locations so I do not believe it to be an earthing isssue, also changed power supply. Any ideas or do they all do it? Thanks

I use amplitude doe iPad and a Tascam IX 35 I think as interface, wondered if peeps here think worth getting sonic por? I have downloaded Mobil pod app today and looks quite good. Been using XTlive and now HD500 live for 9 years so well familiar with Line 6 etc Thanks

Thinking about giving amplifi a go but not sure how useable it is live for changing patches with a foot switch. I have an HD500 which I normally use 4 cable method to connect to a blackstar amp. Can I use the HD500 with amplifi to switch patches and turn individual effects on off?? Thanks

Thanks that makes sense Now to work out how to asign the on off state to the toe switch. Thanks

Hi I wonder if anyone else experiences the following issue at all or has any ideas to overcome it. Set up HD500 connected via 4CM to Blackstar HD60 I am very happy with the a very simple patch I have for most of my songs as follows Looper > volume> gate> distortion > blackstar preamp > mods>delays> blackstar power amp If I then add a Wah effect next to volume I loose a lot of the quality tone even when it is not on, so I mean I have added the Wah effect into the signal path but it is not engaged. I fully understand that the sound change ps when I kick the Wah in using toe switch but can pt understand why it does it even when not on. As soon as I take Wah out of signal chain overall tone returns. Any ideas?? I was thinking about getting a separate Wah pedal. Thanks

Jandrio I don't plan to use the blackstar for acoustic. Planned signal chains are input 1 POD. Electric guitar connected to blackstar using 4 cable method Input 2 POD aux in then XLR out into desk Hope that works

Thanks guys So answer is yes works Asa DI box but I wonder if that is also while by electric and amp are all connect to the HD via 4 cable method. What I am trying to say is can I instantly change from my electric to acoustic without any unplugging and re plugin in cables? Hope that makes sense