bontarou

Thank you very muchf effort. This PDF is highly helpful. It looks like that Ben Vesco has updated DSP usage for 3.50 FW. That would be highly appreciated if you could kindly update the DSP usage tables.

Dear all, Regarding Vol issue. I have posted silly typo at "Trial-01". >(1) Trial-01 >Set Vol=0 (around 7 oclock),--snip-- Then tweak the vol, but nothing can be heard. And one more new trial (Repeated 5 times, and reproduced) (5) Trial-05 (Helix floor is turned off) Set Vol=independent (Zero included, as you like), turn it on and boot. Just leave helix, even after booted. Do not touch anything. (Boot + 30 sec. Total 50-60 sec). Vol Ctrl is working :-) as normal. New (maybe ?) bug. but it is not fatal at all. I guess too nitpicky. It might be original design. I dont remember how it was with FW-282, 280, etc. GlobalSetting-->Display-->LED Ring=Off/Bright Stomp/Preset mode-->Press and hold "MODE" switch-->into Edit mode -->Select block (whatever, lets say Amp block) -->FS1 (Gain) = bright red, the other FS = Off (not dim, as GlobalSetting) -->press the other parameter (say FS3 Mid)-->FS3 =bright red, FS1 =remain dim red, not off. LED of FS1 is supposed to be Off, I guess. -->press the other parameter-->the FS gets bright red, previous LED ring =remain dim red, not off. -->repeat the same for all parameters on the same page-->All FS,1--6, light red (bright/dim, not off) -->next page-->FS1 (Master) = bright red, the other FS = Off (rest of behavior is same as above) -->previous page-->FS1 (Gain) = bright red, the other FS = Off.

Dear all, I am Japanese and so sorry my humble English. I am facing the same (maybe) vol problem with 2.90. Helix-Floor, tested Main Vol only (phone vol not been tested), Footswitch=Preset mode, 1/4 out, FRFR. (1) Trial-01 (Helix floor is turned off) Set Vol=0 (around 7 oclock), turn it on and boot, helix wake up at preset 10C (for e.g.) but nothing can be heard, Level meter is working. sometimes preset change does not even work, like hang-up. You cannot to anything. (2) Trial-02 (Helix floor is turned off) Set Vol=not zero e.g., 3 (around 10 oclock), turn it on and boot, you can hear the sound of helix preset 10C. Tweaking vol, but it does not change, sound level you hear stays te same. Sometimes you cannot do preset change, tuner mode, etc. (3) Trial-03 (Helix floor is turned off) Set Vol=not zero e.g., 3 (around 10 oclock), turn it on and boot, you can hear the sound of helix preset 10C. NEVER TOUCH VOL KNOB. Preset change (e.g., 10C->10B->10D whatever), then into Stomp mode, turn on-off some of your effect chain, then into tuner mode (tuner mode = sound-muted), then get out of tuner mode to come back to previous mode (Stomp or Preset). Vol Ctrl is working :-) as normal (hopefully) (4) Trial-04 (Helix floor is turned off) Set Vol=not zero e.g., 3 (around 10 oclock), turn it on and boot, you can hear the sound of helix preset 10C. NEVER TOUCH VOL KNOB. Preset change (e.g., 10C->10B->10D whatever), then into Stomp mode, turn on-off some of your effect chain, Skip tuner mode and tweak the vol. but it does not change, sound level you hear stays the same. I have tried above 4 cases 5 times each and as for vol behavior, it was reproduced. I hope my Trial-03 helps some of you for the time being.