Its good ! I managed to find the solution: 8) (Thanks again to rd2rk for his help ;-) )
Hoping that this can be useful for someone.
1: On the Laney amp head you have to activate the Boost, The Clean, the Lead and adjust the reverb you want with the knob.
2: First of all, I recommend resetting the "Voodoo Lab control Switcher": Hold buttons 2 and 3 then connect the power supply. Buttons 2 and 3 flash. Release them then press 1 then 2 then 3 and finally 4.
Disconnect the power supply and reconnect it.
3: To activate Bank PC + CC of the "Voodoo Lab control Switcher": Hold button 3 then connect the power supply. Button 3 flashes. Release it then press buttons 1 and 2.
Disconnect the power supply and reconnect it.
4: Press the desired Line 6 switch (example 01A), then go to "Menu" then "Command center" Select "Footswitch 1" then select CC Togl.
Then select midi channel 1, then CC # 80. Leave Dimval at 0 and Litval at 127.
Save, then exit with the Line 6 swicth "Edit / Exit Mode". Turn off the LEDs 1,2,3,4 of the "Voodoo Lab control Switcher" and press the switch 01A of the HX Effects, it works!
We can repeat the same things on 4 different toogle and control the LEDs 1-2-3-4 of the "Voodoo Lab control Switcher":
Midi 1, CC # 80
Midi 1, CC # 81
Noon 1, CC # 82
Noon 1, CC # 83
5: To finish, activate or deactivate the toogles of the preset to control the leds of the "Voodoo Lab control Switcher" and you can order:
Reverb, clean, lead and boost (since the rhythm channel is the main channel.
Here is if it can be useful for someone!
In any case, it's really exellent, my amp is now midified and the sound is exellent. It is possible to combine each channel with any effect, it's great!
Traduction en Français :
C'est bon ! J'ai réussi à trouver la solution :8)
En espérant que cela pourras servir à quelqu'un.
1 : Sur la tête d'ampli Laney il faut activer le Boost, Le Clean, le Lead et doser la reverb que l'on souhaite avec le potard.
2 : Tout d'abord je conseille de réinitialiser le "Voodoo Lab control Switcher" : Maintenir les boutons 2 et 3 puis brancher l'alimentation. Les boutons 2 et 3 clignotent. Les relacher puis appuyer sur 1 puis 2 puis 3 et enfin 4.
Débrancher l'alimentation et la rebrancher.
3 : Pour activer Bank PC + CC du "Voodoo Lab control Switcher" : Maintenir le bouton 3 puis brancher l'alimentation. Le bouton 3 clignote. Le relacher puis appuyer sur le bouton 1 et 2.
Débrancher l'alimentation et la rebrancher.
4 : Appuyer sur le switch voulu du Line 6 (exemple 01A), puis aller dans "Menu" puis "Command center" Selectionner "Footswitch 1" puis selectionner CC Togl.
Ensuite selectionner midi channel 1, puis CC# 80. Laisser Dimval à 0 et Litval à 127.
Sauvegarder, puis sortir avec le swicth du Line 6 "Mode Edit/Exit". Eteindre les leds 1,2,3,4 du "Voodoo Lab control Switcher" et appuyer sur le le switch 01A du HX Effects, ça marche !
On peut répéter la même choses sur 4 toogle différents et controler les Leds 1-2-3-4 du "Voodoo Lab control Switcher" :
Midi 1, CC# 80
Midi 1, CC# 81
Midi 1, CC# 82
Midi 1, CC# 83
5 : Pour finir, activer ou désactiver les toogles du préset pour controler les leds du "Voodoo Lab control Switcher" et vous pourrez commander :
La reverb, le clean, le lead et le boost (puisque le canal rythmiques est le canal principal.
Voila si ça peut servir à quelq'un !
En tout cas, c'est vraiment exellent, mon ampli est maintenant midifié et le son est exellent. Il est possible de combiner chaque canal avec n'importe quel effet, c'est génial !