perlan77

All worked fine for years but updating to Native to 3.80 on my MacBook Air m2 messed it up. Stuck on the same screen and have tried uninstalling (by removing all those files at /library/.. etc Also tried de-authorizing and running license manager to authorize but still same problem..

Arguing with imbeciles is like masturbating with a cheese grater. Slightly amusing but mostly painful. @Phil_m, thanks for the pointers. Appreciate the help! Cheers.

This video explains it It's all covered in the manual. He should have made list on how to read a manual instead.

My attitude being re-adjusted? Seriously? I suggested there should be a reference to the Command Center in the MIDI chapter and have been met with sarcastic posts in bold, or a list how to use a manual? And I am the one with an attitude? Please elaborate how one would find command center if you use the manual as a reference guide for looking up MIDI CC? You wouldn't, unless you read thorough the whole thing which roughly 75% of people don't. So either you blame 75% of the people claiming they're ignorant fools or you do a very small adjustment to make it work even as a reference guide for the ignorant fools. I bet you've read through your whole car manual, front to back, right? If someone have a suggestion that would benefit the greater mass I suggest you don't throw sarcasm at them.

Troll

If you got a car with a battery issue you'd go looking in the section for battery in the manual, no? They might have introduced a new chapter in a later revision called "electronic bus system" where more specific details of the battery and functions exists but how would you know unless you read through the whole manual and/or every revision history? Would it be too much to ask that they put a reference in the battery section saying "for further info, see section electronic bus system" Same goes for this manual. I had a query related to MIDI CC and lo and behold, there's a section called MIDI in bold, black letter and more specifically "midi CC" page 60. That says nothing but points you to Controller assign, which in turn is a dead end. Why not a reference to "command center"? Anyway, I did find the solution after Phil mentioned Command center so it's all good.

I went through the manual several times and I googled but couldn't find it. Thing is if you google "Line 6 HX stomp manual" first hit is taking you to Line 6 website, to rev A of the manual (which doesn't contain command center at all). I realized that so I fetched rev D based on fw 3.0 instead. In rev D, Page 60, - MIDI CC doesn't say much so if one doesn't know this "command center" exists, or know it has something to do with MIDI control, I suppose it'd be hard to find. I think they should have put a reference to the command center in the MIDI section of the manual Cheers

I've got issues as well on my Mac. I installed the Line 6 helix driver 1.1.0, or so I thought. Turned out OSX had put the driver under "disabled software". Open [Applications] > [Utilities] > [System Information] and click [Software]. Select [Disable Software] and check if the driver is shown or not I think there's an issue with the driver

Thanks for the reply. I’m not that experienced with midi, how do I go about it if I may ask? cheers

Hello. I've got a HX Stomp with a Mission Engineering EP1-L6 that I mainly use as Wah. When I record something I tend to want to save the raw guitar sound for reamping later. Is it possible to have the pedal transmitting midi CC when I use the wah so I can record the MIDI data in Logic Pro X? Is so I could then elect to edit the data, even change wah type when I reamp later. Thanks