ADY-

Thanks for all the help. I’m gonna cut my losses and use it as is. -dave

Thanks! I might take it to Line 6 to see if they can help me.

Hi guys, I Please need some help. I sent my out of warranty Helix Floor in for service/repair recently. (I almost worked on it myself but didn’t want the pressure). Anyway, two of the TAP LEDs have been intermittently going out and back on again. The left two LEDs were out at first, then the righttwo. They would go back and forth weeks at a time, sometimes ALL would go out. I sprayed some contact cleaner from the top of all the switches for good measure (preventative maintenance) and they all went out for a few days then all came back on for a couple of days then the exact same issue came back again. Two LEDs out at a time intermittently for weeks at a time finally settling on the right two being out. I took it to the repair shop with the right two LEDs out. It is a Line 6 authorized repair facility nearby and the tech said he didn’t find any issues other than the TAP LEDs issue. He texted me this findings and asked for any more details on the issue so he would be clear. I texted him the details above and also offered what I found online: try reflowing the solder joints, cleaning the area and I also offered sources I found for Helix parts. After a day or two he said he reflowed the solder joints and reseated the switch & LEDs. He said the LEDs finally went back on and we decided to close out the repair ticket. So I brought my Helix home but a few days later, the issue is back. 1/2 the LEDs are out again on the TAP switch. This time the left two are out. Could anyone PLEASE HELP with some advice or experience so I can maybe steer the tech in the right direction to get a proper repair when I take it back? I’ve already had it in the shop over a month and will probably have it in the shop for a few months again from what I can tell from our texts. I almost wish I had just opened it up myself or took it to Calabassas directly to have it repaired. Line 6 isn’t too far from me anyway. Well here’s hoping for some help or direction. I can’t understand what could be going on with these LEDs, I hope there is nothing else going on related. thanks in advance. -Dave.

I have an upcoming outdoor gig, and noticed during outdoor recent rehearsal the display and button lights all were nearly invisible in the broad daylight. it would be great if could increase the brightness for outdoor venues thru software update. thanks.

Very cool! Thanks for the heads up!