Paultm

Thanks

Hi Looking to try a power cab Got a Helix hooked up to my Orange Crush Pro via the 4 Cable method and love it... Want to us the powerCab as stage amp, not interested in IR's. Do I need the Plus version?

I use Orange Crush pro, 4 cable method works fantastic.

Not looking for sarcasm, some of you on here are so up your own arses you rather mock than give helpful insight.....

Ok so here is my challenge... I have 4 base snapshot sounds Clean, Crunch, Overdrive & Heavy Overdrive. I have 3 delays, flanger, rotary, chorus, boost, phaser that need to be available for any of my base sounds. So 8 snapshots will not work all those different combinations , which is why I have to go into Mode to toggle more stomps. Just want to see if there is any better way of working presets.

Sure understood, It's not the amount of snapshots but the switchable effects I use within each snapshots I use 4 snapshots..... Clean Crunch Overdrive Heavy overdrive Which leaves only 4 switchable effects buttons, if I need more I have to go into Mode to access more effects to use. Considering using a non snapshot preset to give me more flexibility.

Hi, Anyone use Snapshots and Non Snapshot presets? Current snapshots doesn't give me enough space for additional foot switchable effects.

Any help would be appreciated, currently using a Blackstar Artist 15 4CM which sounds great, but looking for back up/alternative options.

How did you do the A/B switching & stuff? My Blackstar switches with these commands use this settings in command centre to a footswtich Command = Bank/prog midi ch 1 Program 1 =clean 2= crunch 3=super crunch

Thanks for the info. Midi switching is not the issue for me, its the effects that I don't want to use going from Clean to any of the other channels. If I can configure switching/routing to achieve this that would be great.....

Will this stop the chorus being used separately assigned to its own footswitch? I need to switch to either Crunch or Super Crunch from Clean. I have not managed to create one patch yet to achieve this , I use 3 patches at the moment. Clean, Crunch & Super Crunch....

Hi Here's my challenge...... I have a Blackstar Series on 50 head and currently use Midi to switch channels and due to the latency of switching patches, I want to se if there is any way to use one patch to switch channels and effects. I do not use 4 cable method due to tone suck, I run the guitar out via 1/4 of Helix to front of amp in path 1 and use a 2nd separate path for the effects loop through the amp via send 1 & 2 Changing channels is fine using midi, but changing from a clean with chorus to a crunch or super crunch channel without chorus is proving to be difficult in a single patch. Clean channel only effects - Chorus & long delay Shared effects on all 3 channels - delays, phaser, flanger, reverb. Any suggestions would be appreciated Thanks Paul

Hi, Anyone put together a good organ sound effect? Paul Hindmarsh has produced track with 2 rotary speakers in the patch that sounds good. I use a EHX pedal at the moment but would like to get a good organ and synth sounds from the helix.

Any one using this? Interested in the limitations of how many channels are switchable 2 or 3? Cheers Paul

Hi, Looking to buy a JVM and need to know what midi values can be used to control the channel options. The way the JVM works is that you set the amp desired setting, activate Midi mode, and send any code such as 01 from Helix pedal. The JVM remembers the Midi value and channel setting and recalls it when you send 0. So what Midi CC# values are free to use for this set up? Thanks Paul